Fencing Materials

The Reinas fence panel is a good quality, well-made, decorative fence panel. It looks the same from both sides; perfect for shared boundaries. These panels are constructed with ‘hit & miss’ slats that allow wind to pass through. This panel has a smooth machined finish and is pressure treated green.

Height; middle of curve: 1800mm (approx. 6')
Height; edge of curve: 1600mm
Width: 1800mm
Depth: 45mm

Please note this panel is 1800mm wide, not 1829mm (6’), you can increase the panel width to 1829mm by attaching panel packing strips, sold separately.

The Wells fence panel is a good quality, well-made, decorative fence panel. It looks the same from both sides; perfect for shared boundaries. These panels are constructed with ‘hit & miss’ slats that allow wind to pass through. This panel has a smooth machined finish and is pressure treated green.

Height Including Trellis: 1800mm (approx. 6')
Width: 1800mm
Depth: 45mm

Please note this panel is 1800mm wide, not 1829mm (6’), you can increase the panel width to 1829mm by attaching panel packing strips, sold separately.

The Madrid fence panel is a good quality, well-made, decorative fence panel. It looks the same from both sides; perfect for shared boundaries. These panels are constructed with ‘hit & miss’ slats that allow wind to pass through. This panel has a smooth machined finish and is pressure treated green.

Height; middle of curve: 1800mm (approx. 6')
Height; edge of curve: 1600mm
Width: 1800mm
Depth: 45mm

Please note this panel is 1800mm wide, not 1829mm (6’), you can increase the panel width to 1829mm by attaching panel packing strips, sold separately.

The San Remo fence panel is a good quality, well-made, decorative fence panel. It looks the same from both sides; perfect for shared boundaries. These panels are constructed with ‘hit & miss’ slats that allow wind to pass through. This panel has a smooth machined finish and is pressure treated green.

Height - middle of curve: 1800mm (approx. 6')
Height - edge of curve: 1600mm
Width: 1800mm
Depth: 45mm

Please note this panel is 1800mm wide, not 1829mm (6’), you can increase the panel width to 1829mm by attaching panel packing strips, sold separately.

The Roma fence panel is a good quality, well-made, decorative fence panel. It looks the same from both sides; perfect for shared boundaries. These panels are constructed with ‘hit & miss’ slats that allow wind to pass through. This panel has a smooth machined finish and is pressure treated green.

Height: 1800mm (approx. 6')
Width: 1800mm
Depth: 45mm

Please note: This panel is 1800mm wide, not 1829mm (6’), you can increase the panel width to 1829mm by attaching panel packing strips, sold separately.

The Venetian fence panel is a good quality, fence panel that combines modern styling with heavy duty construction. It looks similar from either side (photos of both sides attached); perfect for shared boundaries. These panels are constructed with sturdy slats that allow wind to pass through. This panel has a smooth machined finish and is pressure treated green.

Height: 1800mm (approx. 6')
Width: 1800mm
Frame: 45mm x 70mm
Slats: 15 x 45mm

Please note: This panel is 1800mm wide, not 1829mm (6’), you can increase the panel width to 1829mm by attaching panel packing strips, sold separately.

A single 15mm thick timber packing strip, used to increase the width of 1800mm wide fence panels to 1830mm (6').

Fence panels manufactured in the U.K. are normally 6' wide (1830mm), fence panels manufactured in European countries are normally 1800mm wide. Packing strips can be attached to both sides of fence panels to increase their width from 1800mm to 1830mm, this enables 1800mm panels to fit between posts that were installed to suit 1830mm ( 6' ) wide panels.

Packing strips are also needed if 1800mm wide fence panels are being fitted with 1830mm concrete gravel boards.

Two Packing Strips are required per fence panel, attach them to the panel with 30mm panel pins or screws.

This Length of packing strip will suit:
Milano - 1.2m
Neris Convex - 1.1m
Reinas Convex - 1.1m

A single 15mm thick timber packing strip, used to increase the width of 1800mm wide fence panels to 1830mm (6').

Fence panels manufactured in the U.K. are normally 6' wide (1830mm), fence panels manufactured in European countries are normally 1800mm wide. Packing strips can be attached to both sides of fence panels to increase their width from 1800mm to 1830mm, this enables 1800mm panels to fit between posts that were installed to suit 1830mm ( 6' ) wide panels.

Packing strips are also needed if 1800mm wide fence panels are being fitted with 1830mm concrete gravel boards.

Two Packing Strips are required per fence panel, attach them to the panel with 30mm panel pins or screws.

Square Trellis Panels are sturdy and built to last; made from sawn finish 19 x 38mm batten; nailed construction. Pressure treated Green.

- Width: 1829mm ( 6’ )
- Height: 305mm ( 1’ )
- Hole Size: 110 x 95mm (approx.)
- 19 x 38mm Sawn Batten
- Nailed Construction
- Pressure Treated Green

Square Trellis Panels are sturdy and built to last; made from sawn finish 19 x 38mm batten; nailed construction. Pressure treated Green.

- Width: 1829mm ( 6’ )
- Height: 610mm ( 2’ )
- Hole Size: 110 x 105mm (approx.)
- 19 x 38mm Sawn Batten
- Nailed Construction
- Pressure Treated Green

Square Trellis Panels are sturdy and built to last; made from sawn finish 19 x 38mm batten; nailed construction. Pressure treated Green.

- Width: 1829mm ( 6’ )
- Height: 915mm ( 3’ )
- Hole Size: 110 x 108mm (approx.)
- 19 x 38mm Sawn Batten
- Nailed Construction
- Pressure Treated Green

Square Trellis Panels are sturdy and built to last; made from sawn finish 19 x 38mm batten; nailed construction. Pressure treated Green.

- Width: 1829mm ( 6’ )
- Height: 1219mm ( 4’ )
- Hole Size: 110 x 110mm (approx.)
- 19 x 38mm Sawn Batten
- Nailed Construction
- Pressure Treated Green

Square Trellis Panels are sturdy and built to last; made from sawn finish 19 x 38mm batten; nailed construction. Pressure treated Green.

- Width: 1829mm ( 6’ )
- Height: 1525mm ( 5’ )
- Hole Size: 110 x 110mm (approx.)
- 19 x 38mm Sawn Batten
- Nailed Construction
- Pressure Treated Green

Square Trellis Panels are sturdy and built to last; made from sawn finish 19 x 38mm batten; nailed construction. Pressure treated Green.

- Width: 1829mm ( 6’ )
- Height: 1829mm ( 6’ )
- Hole Size: 110 x 110mm (approx.)
- 19 x 38mm Sawn Batten
- Nailed Construction
- Pressure Treated Green

Diamond Trellis panels are constructed using good quality planed battens, they are framed all round with rebated framing. This attractive trellis panel obscures visibilty between boundaries without the need of a solid fence or the need to block out daylight. This product is pressure treated green.

- Width: 1829mm ( 6' )
- Height: 300mm
- Hole Size: (approx.) 50 x 50mm.
- Frame Thickness: 30mm
- Pressure Treated