Fencing Materials

3.0m slotted concrete post; fully slotted in a "H" design on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 3000mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 58kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

3.6m slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 128mm x 125mm x 3680mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 89kg Each
- C50 Concrete (a strong mix)
- Four 6.5mm rebar set inside

2.4m slotted concrete Corner post; fully slotted on two adjacent sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 123mm x 130mm x 2400mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 66kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

2.7m slotted concrete corner post; fully slotted on two adjacent sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 123mm x 130mm x 2400mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 66kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

2.4m slotted Concrete End Post; fully slotted on one side for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2400mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 50kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

Slotted Concrete End Post; fully slotted on one side for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2700mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 56kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

These concrete gravel boards are designed to be used with recessed concrete posts. Concrete gravel boards for recessed posts give feather edge fencing a level surface to sit on. Raising feather edge boards on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers.

- Dimensions: 50mm x 150mm x 2400mm
- 40kg Each
- C50 Concrete (a strong mix)
- Two 5.5mm rebar set inside
- One 14mm diameter hole in the middle to attach a support post (if required)

These concrete gravel boards are designed to be used with recessed concrete posts. Concrete gravel boards for recessed posts give feather edge fencing a level surface to sit on. Raising feather edge boards on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers.

- Dimensions: 50mm x 150mm x 3000mm
- 52kg Each
- C50 Concrete (a strong mix)
- Two 5.5mm rebar set inside
- One 14mm diameter hole in the middle to attached a support post (if required)

Heavy duty concrete fence post for feather-edge fencing. This post has a weathered top; 3 recesses with bolt holes for fencing rails and bolt holes at the bottom to fit a gravel board. View image 2 for dimensions. This post is suitable for 1.35m feather edge boarding with a 150mm gravel board.

- Post Length: 2205mm
- Suitable for 1.35m Feather Edge + 150mm Gravel Board
- Three Recesses for 47 x 75mm Rail
- Use M8 x 180mm bolts to attach rails & gravel boards
- 67kg Each

Heavy duty concrete fence post for feather-edge fencing. This post has a back-weathered top, 3 recesses with bolt holes for fencing rails and bolt holes at the bottom to fit a gravel board. View image 2 for post dimensions. This post is designed to suit 1.65m feather edge boarding with a 150mm gravel board.

- Post Length: 2485mm
- Suitable for 1.65m Feather Edge + 150mm Gravel Board
- Three Recesses for 47 x 75mm Rail
- Use M8 x 180mm bolts to attach rails & gravel boards
- 73kg Each

Concrete repair spurs are used when a wooden fence post has snapped or rotted off at ground level. If the fencing above ground level is still servicable; extend the life of the fence by fitting a repair spur. Tips on how to fit a Repair Spur in 'Full Description' tab (below).

- Dimensions: 75 x 75 x 990mm
- Two bolt holes for M10 Carriage Bolts or M10 Coach Screws
- 14kg

Concrete repair spurs are used when a wooden fence post has snapped or rotted off at ground level. If the fencing above ground level is still servicable; extend the life of the fence by fitting a repair spur. Tips on how to fit a Repair Spur in 'Full Description' tab (below).

- Dimensions: 100 x 100 x 1220mm
- Three bolt holes for M10 Carriage Bolts or M10 Coach Screws
- 26kg

A premium quality Overlap Panel which is built to last.

Height: 914mm (3')
Width: 1829mm (6')

- Fully pressure treated panels
- Nailed construction
- Straight-edge, horizontal, sawn-finish slats
- Five vertical battens on both sides (approx. 16 x 38mm)
- Framed top and bottom on both sides (approx. 16 x 38mm)
- Finished and protected with a top capping strip
- These panels look the same from both sides, perfect for shared boundaries
- Manufactured in the U.K.

A premium quality Overlap Panel which is built to last.

Height: 1219mm (4')
Width: 1829mm (6')

- Fully pressure treated panels
- Nailed construction
- Straight-edge, horizontal, sawn-finish slats
- Five vertical battens on both sides (approx. 16 x 38mm)
- Framed top and bottom on both sides (approx. 16 x 38mm)
- Finished and protected with a top capping strip
- These panels look the same from both sides, perfect for shared boundaries
- Manufactured in the U.K.

A premium quality Overlap Panel which is built to last.

Height: 1524mm (5')
Width: 1829mm (6')

- Fully pressure treated panels
- Nailed construction
- Straight-edge, horizontal, sawn-finish slats
- Five vertical battens on both sides (approx. 16 x 38mm)
- Framed top and bottom on both sides (approx. 16 x 38mm)
- Finished and protected with a top capping strip
- These panels look the same from both sides, perfect for shared boundaries
- Manufactured in the U.K.