Search
Mon-Fri: 8am to 5pm | Sat: 8am to 12pm | Sun: Closed
Show Prices Inc. VAT
Product Catalogue
    Menu Close

    Builders Metalwork

    View as Grid List
    Sort by
    Display per page
    Picture of 1000mm x 28mm x 2mm Flat Strap

    1000mm x 28mm x 2mm Flat Strap

    For vertical and horizontal restraint when connecting timber floor and roof systems to masonry walls.
    Stock Availability: 61 in stock
    £4.62 Inc. VAT
    Picture of 1000mm x 28mm x 2mm Twisted Strap

    1000mm x 28mm x 2mm Twisted Strap

    Pre-galvanised twisted restraint straps, designed to building regulations for vertical restraint.

    Strap thickness: 2mm
    Strap width: 28mm
    Strap total length: 1000mm
    Distance from top of strap to top of twist: 100mm
    6mm holes along the length of the strap
    Stock Availability: 17 in stock
    £4.13 Inc. VAT
    Picture of 1000mm x 28mm x 4mm Flat Strap

    1000mm x 28mm x 4mm Flat Strap

    For vertical and horizontal restraint when connecting timber floor and roof systems to masonry walls.
    Stock Availability: 55 in stock
    £7.19 Inc. VAT
    Picture of 100mm Mending Plate

    100mm Mending Plate

    A mild steel plate with fixing holes used for strengthening and repairs.
    Pre-drilled fixing holes for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance.

    Thickness: 2.0mm
    Width: 19mm
    Length: 100mm
    Fixing Holes: 5.0mm (x4)
    Stock Availability: 97 in stock
    From £0.31 Inc. VAT
    Picture of 100mm T Plate

    100mm T Plate

    Steel T-plate suitable for a range of timber frame building uses. Bright Zinc Plated (BZP) for corrosion resistance.

    Thickness: 2.0mm
    Overall Width: 100mm x 19mm
    Overall Length: 100mm x 19mm
    Fixing Holes: 6.0mm (x5)
    Stock Availability: 68 in stock
    £0.94 Inc. VAT
    Picture of 110mm Fencemate Adjustable Bolt Down Post Support

    110mm Fencemate Adjustable Bolt Down Post Support

    A post support fitting for installing timber posts and timber framework. The timber sits on the Post Support out of ground contact, which prevents rotting due to moisture from the ground. The height/level of the square support plate can easily be adjusted which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

    Installation: drill a 22mm diameter hole in the end of the timber post for the threaded bar to fit into, the depth of hole will vary depending on how much elevation is required. The post should sit firmly over the threaded bar down to the square support plate. The two nuts are tightened against each other to lock the support plate in the required position. The bottom of the post support is designed to be bolted down to a concrete base, we recommend using M10 Thunder Bolts.

    - Welded construction, galvanised steel
    - Total Height - 255mm
    - Threaded bar - 22mm diameter
    - Square support plate - 100 x 100mm x 4.5mm
    - Bolt Down Plate - 100 x 100mm x 4.5mm
    - 11mm fixing holes (x8)
    Stock Availability: 3 in stock
    £20.69 Inc. VAT
    Picture of 150mm Mending Plate

    150mm Mending Plate

    A mild steel plate with fixing holes used for strengthening and repairs.
    Pre-drilled for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance.

    Thickness: 2.5mm
    Width: 26mm
    Length: 150mm
    Fixing Holes: 5.0mm (x4)
    Stock Availability: 72 in stock
    From £0.68 Inc. VAT
    Picture of 20mm x 10m Fixing Band

    20mm x 10m Fixing Band

    Galvanised fixing band FB20A has many building & DIY uses.

    - Flexible galvanised steel can be easily shaped by hand
    - 1mm thick
    - 20mm Wide
    - 10m Coil
    - Includes three hole options to suit a variety of fixings
    Stock Availability: 13 in stock
    £9.95 Inc. VAT
    Picture of 40mm x 120mm Nail Plate

    40mm x 120mm Nail Plate

    Simpson Strong-Tie NP15/80/140 nail plates can be used in various applications, in particular for jointing or the connection of wood elements in the same plane.

    Thickness: 1.5mm
    Width: 40mm
    Length: 120mm
    Fixing Holes: 5.0mm (x9)
    Stock Availability: 128 in stock
    £0.67 Inc. VAT
    Picture of 47mm Ridge Rafter Connector

    47mm Ridge Rafter Connector

    Nationwide delivery available on this product, contact us for details

    The RR ridge rafter connector provides alignment control and correct nailing locations. The RR47 may be used with any rafter slope up to 30°. Galvanised for corrosion resistance.

    For back-to-back installations, the minimum width of the ridge plate is 38mm. Secure in place using 3.75 x 30mm square twisted nails.

    Measurements (Ref. image 3):
    A: 47mm
    B: 83mm
    C: 33mm
    D: 114mm
    t (Thickness): 1.2mm

    Fixing Holes:
    Header: 4mm (x4)
    Joist: 4mm (x4)
    Stock Availability: 66 in stock
    £2.33 Inc. VAT
    Picture of 47mm Truss Clip

    47mm Truss Clip

    Galvanised Truss Clip for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

    - Suitable for securing 47mm wide timber
    - Overall Width - 105mm (including fixing wings)
    - Length - 100mm

    Install using 3.75 x 30mm square twist nails
    6 nail holes / truss clip
    1 kg square twist nails installs approx. 58 truss clips
    Stock Availability: 196 in stock
    £0.53 Inc. VAT
    Picture of 65mm Handrail Bracket

    65mm Handrail Bracket

    Simple contempory design, used for fixing handrails to walls.
    Stock Availability: 8 in stock
    £1.80 Inc. VAT
    Picture of 75mm Mending Plate

    75mm Mending Plate

    A mild steel plate with fixing holes used for strengthening and repairs.
    Pre-drilled for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance.

    Thickness: 1.8mm
    Width: 18mm
    Length: 75mm
    Fixing Holes: 5.0mm (x4)
    Stock Availability: 77 in stock
    From £0.18 Inc. VAT
    Picture of 75mm T Plate

    75mm T Plate

    Steel T-plate suitable for a range of timber frame building uses. Bright Zinc Plated (BZP) for corrosion resistance.

    Thickness: 2.0mm
    Overall Width: 75mm x 16mm
    Overall Length: 75mm x 16mm
    Fixing Holes: 5.0mm (x5)
    Stock Availability: 75 in stock
    £0.60 Inc. VAT
    Picture of 80mm Fencemate Adjustable Bolt Down Post Support

    80mm Fencemate Adjustable Bolt Down Post Support

    A post support fitting for installing timber posts and timber framework. The timber sits on the Post Support out of ground contact, which prevents rotting due to moisture from the ground. The height/level of the square support plate can easily be adjusted which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

    Installation: drill a 22mm diameter hole in the end of the timber post for the threaded bar to fit into, the depth of hole will vary depending on how much elevation is required. The post should sit firmly over the threaded bar down to the square support plate. The two nuts are tightened against each other to lock the support plate in the required position. The bottom of the post support is designed to be bolted down to a concrete base, we recommend using M10 Thunder Bolts.

    - Welded construction, galvanised steel
    - Total Height - 255mm
    - Threaded bar - 22mm diameter
    - Square support plate - 80 x 80mm x 4.5mm
    - Bolt Down Plate - 80 x 80mm x 4.5mm
    - 11mm fixing holes (x8)
    Stock Availability: 11 in stock
    £17.71 Inc. VAT
    banner

    Call us Monday - Friday 8am - 5pm. Saturday 8am - 12pm.