Fixings & Metalwork

A quality Post Base made by Simpson Strong-Tie. Used to raise timber posts and timber framework above ground level, which prevents rotting caused by moisture from ground contact. The height/level of the square support plate can easily be adjusted after installation which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

- Dichromate coated galvanised mild steel
- Height Adjustable: 100mm→150mm
- Threaded Core: 20mm diameter
- Top plate: 100 x 100mm x 5mm
- Base plate: 130 x 130mm x 5mm
- 12mm fixing holes

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for double 45mm joists
- Width: 189mm (including fixing wings)
- Height: 234mm
- Depth: 52mm

34° collated ring shank nails with an electro galvanised finish. One gas canister is included per 1100 nails, eliminating the need for spare gas. Compatible with most gas powered first fix nails guns, including the Paslode IM350, Paslode PPN35Ci & Hitachi NR90GC.

34° collated ring shank nails with an electro galvanised finish. One gas canister is included per 1100 nails, eliminating the need for spare gas. Compatible with most gas powered first fix nails guns, including the Paslode IM350, Paslode PPN35Ci & Hitachi NR90GC.

Simpson Strong-Tie NP15/80/140 nail plates can be used in various applications, in particular for jointing or the connection of wood elements in the same plane.

Thickness: 1.5mm
Width: 80mm
Length: 140mm
Fixing Holes: 5.0mm (x25)

A post support fitting for installing timber posts and timber framework. The timber sits on the Post Support out of ground contact, which prevents rotting due to moisture from the ground. The height/level of the square support plate can easily be adjusted which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

Installation: drill a 22mm diameter hole in the end of the timber post for the threaded bar to fit into, the depth of hole will vary depending on how much elevation is required. The post should sit firmly over the threaded bar down to the square support plate. The two nuts are tightened against each other to lock the support plate in the required position. The bottom of the post support is designed to be bolted down to a concrete base, we recommend using M10 Thunder Bolts.

- Welded construction, galvanised steel
- Total Height - 255mm
- Threaded bar - 22mm diameter
- Square support plate - 80 x 80mm x 4.5mm
- Bolt Down Plate - 80 x 80mm x 4.5mm
- 11mm fixing holes (x8)

34° collated ring shank nails with an electro galvanised finish. One gas canister is included per 1100 nails, eliminating the need for spare gas. Compatible with most gas powered first fix nails guns, including the Paslode IM350, Paslode PPN35Ci & Hitachi NR90GC.

34° collated ring shank nails with an electro galvanised finish. One gas canister is included per 1100 nails, eliminating the need for spare gas. Compatible with most gas powered first fix nails guns, including the Paslode IM350, Paslode PPN35Ci & Hitachi NR90GC.

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for 75mm wide timber
- Width - 169mm (including fixing wings)
- Height - 247mm
- Depth - 55mm

75mm Vine Eye with screw end, used for straining wire for climbing plants.

- Length: 75mm
- Thickness: 4.0mm
- Internal eye diameter: 11mm
- Mild Steel
- Bright Zinc Plated (BZP)
- Folded Eye (Unwelded)

33.3% discount for box quantities

Steel T-plate suitable for a range of timber frame building uses. Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.0mm
Overall Width: 75mm x 16mm
Overall Length: 75mm x 16mm
Fixing Holes: 5.0mm (x5)

A mild steel plate with fixing holes used for strengthening and repairs.
Pre-drilled for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 1.8mm
Width: 18mm
Length: 75mm
Fixing Holes: 5.0mm (x4)

Traditional round wire nails for fixing timber to timber. Large head for increased holding power.

Nail Length: 75mm
Nail gauge: 3.75mm
Average nail count = 154 /kg
Finish: Galvanised, service class 3 according to EN 10016-2
Manufactured to BS EN 10230-1

High performance external woodscrews with an organic green coating for corrosion resistance.
Suitable for use in all softwoods, including: decking, fencing, sheds etc.
For hardwood decking we recommend Spax stainless steel decking screws.

- Number 8 diameter (4.2mm)
- PZ2 Drive, screwdriver bits sold separately

High performance external woodscrews with an organic green coating for corrosion resistance.
Suitable for use in all softwoods, including: decking, fencing, sheds etc.
For hardwood decking we recommend Spax stainless steel decking screws.

- Number 8 diameter (4.2mm)
- PZ2 Drive, screwdriver bits sold separately