Fixings & Metalwork

High tensile threaded bar / studding.

- M6 (metric 6mm) thread diameter
- 1.0m length
- High tensile steel grade 8.8
- Bright Zinc Plated finish (BZP)
- Nuts & washers sold separately

* This is a special order item, typically available within 1-2 working days

A light duty fixing for jobs where speed of installation is important.
Hammer fixings work in a similar way to screws and plugs, the hammer fixing screw has a special thread that can be hammered into the plug and loosened / screwed out if required.

Installation:
Pre-drill a 5mm pilot hole through the item that you're fixing and into the masonry or brickwork. Lightly tap the fixing through the pilot hole with a hammer until the plug is flush. EG. if you're fixing a timber wall plate, the plug fits inside the timber as well as the wall. Once the plug is flush with the timber, hit the head of the screw harder to drive it into the plastic sleeve until tight.

Minimum fixing depth: 45mm

A large heavy steel washer, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Dimensions: 3mm x 50mm x 50mm
22mm Bolt Hole: To suit M20 thread

Hex nut with metric thread, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Thread: 20mm - Metric
Depth: 15mm
Spanner Size: 30mm

A heavy steel washer, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Dimensions: 3mm x 39mm Diameter
21mm Bolt Hole: To suit M20 thread