M20 Hex Nut

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Graded to meet BS5534 standards, this batten is used in the building trade for roofing projects.

- Stained Blue*, for grade identification purposes
- Fine-sawn finish
- Pressure treated
- Complies with BS5534

*If blue batten is not available we occasionally have gold batten which meets the same standard

CLS (Canadian Lumber Standard), a general purpose, non-structural grade, untreated building timber. Typically used for internal first fix applications, E.g. non-structural framing & stud walls.

- Machined from 50 x 100mm, finished size approx. 38 x 89mm
- Smooth regularised finish
- Grade C16
- Untreated softwood

Galvanised mini joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for hanging 47mm wide timber
- Width - 115mm (including fixing wings)
- Length - 62mm
- Depth - 48mm

Install using 3.75 x 30mm square twist nails:
16 nail holes / hanger
1 kg square twist nails installs 21 hangers

Treated carcassing timber for all of your general outdoor projects.
- Machined from 47 x 125mm, finished size approx. 45 x 120mm
- Smooth regularised finish
- Grade C24
- Good quality, slow grown softwood
- Pressure treated green

A large heavy steel washer, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Dimensions: 3mm x 50mm x 50mm
22mm Bolt Hole: To suit M20 thread