Fixings & Metalwork

High performance woodscrews, manufactured from hardened steel. Superdrive Screws have a type 17 point, knurled thread with a wax coating for quick insertion.

Box of 200 screws
Free PZ1 driving bit included with every box

High performance Torx-drive wood screws, made in Germany. The Wirox coating gives a high level of protection against corrosion and is more environmentally friendly than conventional finishes as it is free from chromium-VI. The 4CUT point eliminates the need to pre-drill and reduces splitting during insertion.

- Box of 100 screws
- Suitable for internal & external use
- TX20 Torx screwdriver drive, bits sold separately

High performance woodscrews, manufactured from hardened steel. Superdrive Screws have a type 17 point, knurled thread with a wax coating for quick insertion.

Box of 200 screws
Free PZ1 driving bit included with every box

High performance Torx-drive wood screws, made in Germany. The Wirox coating gives a high level of protection against corrosion and is more environmentally friendly than conventional finishes as it is free from chromium-VI. The 4CUT point eliminates the need to pre-drill and reduces splitting during insertion.

- Box of 100 screws
- Suitable for internal & external use
- TX20 Torx screwdriver drive, bits sold separately

High performance woodscrews, manufactured from hardened steel. Superdrive Screws have a type 17 point, knurled thread with a wax coating for quick insertion.

Box of 100 screws
Free PZ1 driving bit included with every box

High performance decking screw with Wirox coating, made in Germany.
These screws benefit from:

- Countersunk, flush fitting, cylindrical head.
- 4CUT point which minimises splitting & eliminates the need for pre-drilling in softwood.
- T-STAR plus drive (TX20 Torx), one bit included in each box.
- Two-part thread ensures that boards remain securely fixed to the substructure in all weather conditions.
- C4 corrosion resistance

Cut point staples, typically used for attaching wire and netting to timber.

Staple length: 40mm
Staple gauge: 4.0mm
Average staple count = 136 /kg
Finish: Galvanised, service class 3

Traditional round wire nails for fixing timber to timber. Large head for increased holding power.

Nail Length: 40mm
Nail gauge: 2.65mm
Average nail count = 575 /kg
Finish: Galvanised, service class 3 according to EN 10016-2
Manufactured to BS EN 10230-1

Light-duty nails /pins suited to fixing small decorative components; timber to timber. Small head for flush finish.

Pin length: 40mm
Pin gauge: 1.6mm
Average pin count = 1590 /kg (½ kg bag)
Finish: Sherardised, service class 2
Manufactured to BS EN 10230-1

Traditional annular ringshank nails for fixing timber to timber. The threaded shank increases pull out resistance, large head for increased holding power.

Nail Length: 40mm
Nail gauge: 2.65mm
Average nail count = 360 /kg
Finish: Sherardised, service class 2 according to EN 14592:2008
Manufactured to BS 1202-1

Simpson Strong-Tie NP15/80/140 nail plates can be used in various applications, in particular for jointing or the connection of wood elements in the same plane.

Thickness: 1.5mm
Width: 40mm
Length: 120mm
Fixing Holes: 5.0mm (x9)

Galvanised mini joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for hanging 47mm wide timber
- Width - 115mm (including fixing wings)
- Length - 62mm
- Depth - 48mm

Install using 3.75 x 30mm square twist nails:
16 nail holes / hanger
1 kg square twist nails installs 21 hangers

The RR ridge rafter connector provides alignment control and correct nailing locations. The RR47 may be used with any rafter slope up to 30°. Galvanised for corrosion resistance.

For back-to-back installations, the minimum width of the ridge plate is 38mm. Secure in place using 3.75 x 30mm square twisted nails.

Measurements (Ref. image 3):
A: 47mm
B: 83mm
C: 33mm
D: 114mm
t (Thickness): 1.2mm

Fixing Holes:
Header: 4mm (x4)
Joist: 4mm (x4)

Nationwide delivery is available on this product, call 0117 967 4382 for details or submit a contact form below.

Galvanised Truss Clip for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for securing 47mm wide timber
- Overall Width - 105mm (including fixing wings)
- Length - 100mm

Install using 3.75 x 30mm square twist nails
12 nail holes / truss clip
1kg square twist nails installs approx. 29 truss clips

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for 47mm wide timber
- Width: 146.4mm (including fixing wings)
- Length: 236.5mm
- Depth: 52.1mm