Search
Fixings & Metalwork
M12 x 130mm Carriage Bolt
Carriage Bolt; cup square hex, 30mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
71 in stock
From £0.80 Inc. VAT
M12 x 150mm Carriage Bolt
Carriage Bolt; cup square hex, 30mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
72 in stock
From £0.92 Inc. VAT
M12 x 150mm Masonry Bolt
A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.
Drill Bit Dia. - 12mm
Anchor Length - 150mm
Washer Size - 14mm (M14)
Min Hole Depth - 85mm
Min Over Drill Depth - 25mm
Min. Embed Depth - 60mm
Max. Fixture Thickness - 90mm
Drill Bit Dia. for clearance - 14mm (to prevent binding when tightening bolt)
Head Type - Hex Head, 19mm (Across Flats)
Driver Type - Impact driver, socket, spanner
Max Tightening Torque - 80Nm
Drill Bit Dia. - 12mm
Anchor Length - 150mm
Washer Size - 14mm (M14)
Min Hole Depth - 85mm
Min Over Drill Depth - 25mm
Min. Embed Depth - 60mm
Max. Fixture Thickness - 90mm
Drill Bit Dia. for clearance - 14mm (to prevent binding when tightening bolt)
Head Type - Hex Head, 19mm (Across Flats)
Driver Type - Impact driver, socket, spanner
Max Tightening Torque - 80Nm
Stock Availability:
86 in stock
From £3.20 Inc. VAT
M12 x 180mm Carriage Bolt
Carriage Bolt; cup square hex, 30mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
75 in stock
From £1.12 Inc. VAT
M12 x 200mm Carriage Bolt
Carriage Bolt; cup square hex, 30mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
89 in stock
From £1.22 Inc. VAT
M12 x 200mm Masonry Bolt
A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.
Drill Bit Dia. - 12mm
Anchor Length - 200mm
Washer Size - 14mm (M14)
Min Hole Depth - 85mm
Min Over Drill Depth - 25mm
Min. Embed Depth - 60mm
Max. Fixture Thickness - 140mm
Drill Bit Dia. for clearance - 14mm (to prevent binding when tightening bolt)
Head Type - Hex Head, 19mm (Across Flats)
Driver Type - Impact driver, socket, spanner
Max Tightening Torque - 80Nm
Drill Bit Dia. - 12mm
Anchor Length - 200mm
Washer Size - 14mm (M14)
Min Hole Depth - 85mm
Min Over Drill Depth - 25mm
Min. Embed Depth - 60mm
Max. Fixture Thickness - 140mm
Drill Bit Dia. for clearance - 14mm (to prevent binding when tightening bolt)
Head Type - Hex Head, 19mm (Across Flats)
Driver Type - Impact driver, socket, spanner
Max Tightening Torque - 80Nm
Stock Availability:
78 in stock
From £4.25 Inc. VAT
M12 x 220mm Carriage Bolt
Carriage Bolt; cup square hex, 30mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
50 in stock
From £1.39 Inc. VAT
M12 x 300mm Carriage Bolt
Carriage Bolt; cup square hex, 30mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
85 in stock
From £2.02 Inc. VAT
M12 x 50mm Carriage Bolt
Carriage Bolt; cup square hex, 30mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
150 in stock
From £0.58 Inc. VAT
M16 (16mm) x 1000mm BZP Threaded Bar
Mild steel threaded bar / studding.
- M16 (metric 16mm) thread diameter
- 1.0m length
- Mild steel grade 4.6
- Bright Zinc Plated finish (BZP)
- Nuts & washers sold separately
- M16 (metric 16mm) thread diameter
- 1.0m length
- Mild steel grade 4.6
- Bright Zinc Plated finish (BZP)
- Nuts & washers sold separately
Stock Availability:
17 in stock
£5.33 Inc. VAT
M16 (16mm) x 1000mm High Tensile Threaded Bar - BZP
High tensile threaded bar / studding.
- M16 (metric 16mm) thread diameter
- 1.0m length
- High tensile steel grade 8.8
- Bright Zinc Plated finish (BZP)
- Nuts & washers sold separately
* This is a special order item, typically available within 1-2 working days
- M16 (metric 16mm) thread diameter
- 1.0m length
- High tensile steel grade 8.8
- Bright Zinc Plated finish (BZP)
- Nuts & washers sold separately
* This is a special order item, typically available within 1-2 working days
Stock Availability:
Not in stock - This item is available to order.
From £7.87 Inc. VAT
M16 Form C Washer
A heavy steel washer, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.
Dimensions: 3mm x 34mm Diameter
17mm Bolt Hole: To suit M16 thread
BZP (Bright Zinc Plate) finish.
Dimensions: 3mm x 34mm Diameter
17mm Bolt Hole: To suit M16 thread
Stock Availability:
283 in stock
From £0.22 Inc. VAT
M16 Hex Nut
Hex nut with metric thread, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.
Thread: 16mm - Metric
Depth: 12.5mm
Spanner Size: 24mm
BZP (Bright Zinc Plate) finish.
Thread: 16mm - Metric
Depth: 12.5mm
Spanner Size: 24mm
Stock Availability:
152 in stock
£0.18 Inc. VAT
M16 Square Plate Washer
A large heavy steel washer, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.
Dimensions: 3mm x 50mm x 50mm
17mm Bolt Hole: To suit M16 thread
BZP (Bright Zinc Plate) finish.
Dimensions: 3mm x 50mm x 50mm
17mm Bolt Hole: To suit M16 thread
Stock Availability:
210 in stock
From £0.32 Inc. VAT
M20 (20mm) x 1000mm BZP Threaded Bar
Mild steel threaded bar / studding.
- M20 (metric 20mm) thread diameter
- 1.0m length
- Mild steel grade 4.6
- Bright Zinc Plated finish (BZP)
- Nuts & washers sold separately
- M20 (metric 20mm) thread diameter
- 1.0m length
- Mild steel grade 4.6
- Bright Zinc Plated finish (BZP)
- Nuts & washers sold separately
Stock Availability:
20 in stock
£8.15 Inc. VAT
Call us Monday - Friday 8am - 5pm. Saturday 8am - 12pm.
Payment options
