Fixings & Metalwork

High tensile threaded bar / studding.

- M20 (metric 20mm) thread diameter
- 1.0m length
- High tensile steel grade 8.8
- Bright Zinc Plated finish (BZP)
- Nuts & washers sold separately

* This is a special order item, typically available within 1-2 working days

High performance Torx-drive wood screws, made in Germany. The Wirox coating gives a high level of protection against corrosion and is more environmentally friendly than conventional finishes as it is free from chromium-VI. The 4CUT point eliminates the need to pre-drill and reduces splitting during insertion.

- Box of 200 screws
- Suitable for internal & external use
- TX20 Torx screwdriver drive, bits sold separately

High performance Torx-drive wood screws, made in Germany. The Wirox coating gives a high level of protection against corrosion and is more environmentally friendly than conventional finishes as it is free from chromium-VI. The 4CUT point eliminates the need to pre-drill and reduces splitting during insertion.

- Box of 100 screws
- Suitable for internal & external use
- TX20 Torx screwdriver drive, bits sold separately

These Stainless Steel lost-head screws are similar in size to a lost-head nail. They are designed to be used as a hidden fixing for tongue & groove flooring and timber cladding but are perfect for many other projects. Tongue-Tite Plus is intended to be installed at a 30-45 degree angle through the tongue of the board, allowing the groove to fit over the head of the screw. This screw can also be used to face-fix boards, the small head is barely visible when when driven just below the timber surface.

Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.

TX10 screwdriver bit included in the box.
Screw Head Diameter = 4.5mm

These Stainless Steel lost-head screws are similar in size to a lost-head nail. They are designed to be used as a hidden fixing for tongue & groove flooring and timber cladding but are perfect for many other projects. Tongue-Tite Plus is intended to be installed at a 30-45 degree angle through the tongue of the board, allowing the groove to fit over the head of the screw. This screw can also be used to face-fix boards, the small head is barely visible when when driven just below the timber surface.

Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.

TX10 screwdriver bit included in the box.
Screw Head diameter = 4.5mm

Pack of 1000 green (PVC coating) Netting Clips for use with FP222 Fencing Pliers.
Netting clips (also known as Hog Rings) can be used to attach wire mesh and chainlink fencing to line wires, also used for mesh jointing and repairs.

Closed ring diameter: 5 - 11mm

These Stainless Steel lost-head screws are similar in size to a lost-head nail. They are designed to be used as a hidden fixing for tongue & groove flooring and timber cladding but are perfect for many other projects. Tongue-Tite Plus is intended to be installed at a 30-45 degree angle through the tongue of the board, allowing the groove to fit over the head of the screw. This screw can also be used to face-fix boards, the small head is barely visible when when driven just below the timber surface.

Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.

TX10 screwdriver bit included in the box.
Screw Head Diameter = 4.5mm

High performance woodscrews, manufactured from hardened steel. Superdrive Screws have a type 17 point, knurled thread with a wax coating for quick insertion.

Box of 100 screws
Free PZ3 driving bit included with every box

Galvanised fixing band FB20A has many building & DIY uses.

- Flexible galvanised steel can be easily shaped by hand
- 1mm thick
- 20mm Wide
- 10m Coil
- Includes three hole options to suit a variety of fixings

Self drilling timber screws, made from high tensile steel for extreme strength. Perfect for many structural & landscaping projects. These Timberfast screws have a Hex Washer Head, which reduces the chance of "cam out", the moulded 12mm diameter washer ensures that materials are securely clamped together when the screw is tightened.

Popular uses include: building, fencing, decking (connecting framework) and joining sleepers

- Boxes of 50 screws, ¼" Hex Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant black Ruspert® coating - details in download tab below

A cold applied oxidised bitumen based adhesive.
Used to bond roofing felt to most surfaces, sealing felt laps and as a cold gritting solution for bonding mineral chippings

Approx. coverage: 1.4m² / litre

Traditional annular ringshank nails for fixing timber to timber. The threaded shank increases pull out resistance, large head for increased holding power.

Nail Length: 50mm
Nail gauge: 3.35mm
Average nail count = 290 /kg
Finish: Sherardised, service class 2 according to EN 14592:2008
Manufactured to BS 1202-1

High performance wood screws, manufactured from hardened steel. Super Drive Screws have a type 17 point, knurled thread with a wax coating for quick insertion.

Box of 100 screws
Free PZ2 driving bit included with every box

High performance Torx-drive wood screws, made in Germany. The Wirox coating gives a high level of protection against corrosion and is more environmentally friendly than conventional finishes as it is free from chromium-VI. The 4CUT point eliminates the need to pre-drill and reduces splitting during insertion.

- Box of 200 screws
- Suitable for internal & external use
- TX20 Torx screwdriver drive, bits sold separately

High performance woodscrews, manufactured from hardened steel. Superdrive Screws have a type 17 point, knurled thread with a wax coating for quick insertion.

Box of 100 screws
Free PZ3 driving bit included with every box