Search
Mon-Fri: 8am to 5pm | Sat: 8am to 12pm | Sun: Closed
Show Prices Inc. VAT
Product Catalogue
    Menu Close

    3.5 x 49mm Stainless Steel Tongue-Tite Screws - Box 200

    These Stainless Steel lost-head screws are similar in size to a lost-head nail. They are designed to be used as a hidden fixing for tongue & groove flooring and timber cladding but are perfect for many other projects. Tongue-Tite Plus is intended to be installed at a 30-45 degree angle through the tongue of the board, allowing the groove to fit over the head of the screw. This screw can also be used to face-fix boards, the small head is barely visible when when driven just below the timber surface.

    Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
    Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
    The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.

    TX10 screwdriver bit included in the box.
    Screw Head Diameter = 4.5mm
    Availability: 60 in stock
    £12.60 Inc. VAT
    i h

    These Stainless Steel lost-head screws are similar in size to a lost-head nail. They are designed to be used as a hidden fixing for tongue & groove flooring and timber cladding but are perfect for many other projects. Tongue-Tite Plus is intended to be installed at a 30-45 degree angle through the tongue of the board, allowing the groove to fit over the head of the screw. This screw can also be used to face-fix boards, the small head is barely visible when when driven just below the timber surface.


    Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
    Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
    The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.


    TX10 screwdriver bit included in the box.
    Screw Head Diameter = 4.5mm

    Products specifications
    MaterialStainless Steel
    FinishStainless Steel
    Screw Head TypeCountersunk - T10 Drive
    Length49mm
    Diameter3.5mm
    *
    *
    *
    *
    Customers that ordered this item also bought:
    Picture of ex. 19 x 125mm x 5.1m Shiplap

    ex. 19 x 125mm x 5.1m Shiplap

    19 x 125mm Shiplap is popular cladding often used by shed manufacturers to build heavier duty structures such as garden workshops, premium quality sheds, summerhouses, bike stores etc.

    - Machined from: 19 x 125mm
    - Finished Thickness: 14mm
    - Fitted Coverage: 105mm
    - High quality, slow grown redwood
    - Pressure Treated (green), 15 year performance warranty - view the Downloads tab below for details
    - This cladding product is CladMark accredited.
    - We recommend this profile is installed horizontally
    - 9.52 linear metres are needed to cover 1m²
    Stock Availability: 715 in stock
    From £10.57 Inc. VAT
    Picture of 7.5 x 122mm Masonry Screw

    7.5 x 122mm Masonry Screw

    A self-tapping Masonry Screw for brick and concrete, a popular fixing to fit window frames. An easy to use fixing that does not require plastic plugs, it has a high resistance to fire compared to nylon fixings. This screw is a friction fixing which minimises expansion stress in the base material, this allows fixing near to the edge, and gives greater loading performance than most nylon fixings.
    To use: pre-drill a 6mm pilot hole, use a drill or impact driver fitted with T30 bit to drive the screw in.

    T30 bit and white cover caps included when bought in box quantities of 100.

    Drill Bit Dia. - 6mm
    Min. Embed Depth - 45mm
    Head Type - T30 Torx
    Driver Type - Drill / Impact Driver
    Stock Availability: 216 in stock
    From £0.23 Inc. VAT
    Picture of ex. 25 x 150mm x 4.8m T&G

    ex. 25 x 150mm x 4.8m T&G

    A popular heavy duty treated softwood cladding often used to make gates, doors, sheds & other garden structures. Produced from good quality redwood and pressure treated (Green) for outdoor durability.

    - PTGV Profile (Planed Tongue & Groove, with a 'V' joint)
    - Machined from: 25 x 150mm
    - Finished thickness: 20mm
    - Board coverage when fitted: 135mm
    - High quality, slow grown redwood
    - Pressure Treated (green), 15 year performance warranty - view the Downloads tab below for details
    - This cladding product is CladMark accredited.
    - We recommend this profile is installed vertically
    - 7.4 linear metres are needed to cover 1m²
    Stock Availability: 822 in stock
    From £17.16 Inc. VAT
    Picture of ex. 25 x 50mm x 1.83m Western Red Cedar Planed

    ex. 25 x 50mm x 1.83m Western Red Cedar Planed

    Premium quality, Canadian Western Red Cedar, planed finish with four rounded corners.
    A popular product for building superior quality slatted fence screening. Cedar is a naturally durable timber species that will deliver many years of service.

    - Machined From: 1" x 2" x 6' (25.4 x 50.8 x 1830mm)
    - Finished Size: 18 x 44 x 1830mm
    - Grade: Number 2, clear and better
    Stock Availability: 127 in stock
    £9.47 Inc. VAT
    Picture of ex. 25 x 50mm x 2.44m Western Red Cedar Planed

    ex. 25 x 50mm x 2.44m Western Red Cedar Planed

    Premium quality, Canadian Western Red Cedar, planed finish with four rounded corners.
    A popular product for building superior quality slatted fence screening. Cedar is a naturally durable timber species that will deliver many years of service.

    - Machined From: 1" x 2" x 6' (25.4 x 50.8 x 1830mm)
    - Finished Size: 18 x 44 x 1830mm
    - Grade: Number 2, clear and better
    Stock Availability: 38 in stock
    £12.62 Inc. VAT
    Picture of 47 x 75mm x 2.4m C16/C24 - Treated

    47 x 75mm x 2.4m C16/C24 - Treated

    - Machined from 47 x 75mm, finished size approx. 45 x 70mm
    - Smooth regularised finish
    - Grade C16 / C24 - mixed
    - Good quality, slow grown softwood
    - Pressure treated green
    Stock Availability: 1519 in stock
    £4.99 Inc. VAT