Fixings & Metalwork

High performance woodscrews, manufactured from high quality, low carbon steel & case hardened. The type 17 point, knurled thread and wax coating all help reduce the torque required for quick insertion.

- Thread diameter: 3.5mm
- Length: 16mm
- Box of 200 screws
- Free PZ2 driving bit included with every box

The Simpson Strong-Tie ABR90 (previously E2/2.5/7090) is a heavy-duty reinforced angle bracket (reinforced in corner) for many applications. Galvanised for corrosion resistance.

Measurements (Ref. image 2):
A: 90mm
B: 90mm
C: 65mm
Thickness: 2.5mm
Fixing Holes: 11.5mm (x2) + 5.0mm (x20)

The RR ridge rafter connector provides alignment control and correct nailing locations. The RR47 may be used with any rafter slope up to 30°. Galvanised for corrosion resistance.

For back-to-back installations, the minimum width of the ridge plate is 38mm. Secure in place using 3.75 x 30mm square twisted nails.

Measurements (Ref. image 3):
A: 47mm
B: 83mm
C: 33mm
D: 114mm
t (Thickness): 1.2mm

Fixing Holes:
Header: 4mm (x4)
Joist: 4mm (x4)

Nationwide delivery is available on this product, call 0117 967 4382 for details or submit a contact form below.

High tensile threaded bar / studding.

- M8 (metric 8mm) thread diameter
- 1.0m length
- High tensile steel grade 8.8
- Bright Zinc Plated finish (BZP)
- Nuts & washers sold separately

* This is a special order item, typically available within 1-2 working days

Mild steel threaded bar / studding.

- M10 (metric 10mm) thread diameter
- 1.0m length
- Mild steel grade 4.6
- Bright Zinc Plated finish (BZP)
- Nuts & washers sold separately

Carriage Bolt; cup square hex, 30mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.

Drill Bit Dia. - 10mm
Anchor Length - 150mm
Washer Size - 12mm (M12)
Min Hole Depth - 70mm
Min Over Drill Depth - 20mm
Min. Embed Depth - 50mm
Max. Fixture Thickness - 100mm
Drill Bit Dia. for clearance - 12mm (to prevent binding when tightening bolt)
Head Type - Hex Head, 17mm (Across Flats)
Driver Type - Impact driver, socket, spanner
Max Tightening Torque - 60Nm

Folded eye bolt, used for straining and tightening wires.

- Length: 250mm (to centre of eye)
- ⅜" Imperial thread (approx. 9mm thick)
- Internal eye diameter 15mm
- Includes 2 nuts & 2 Washers
- Bright Zinc Plated finish

A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.

Drill Bit Dia. - 10mm
Anchor Length - 130mm
Washer Size - 12mm (M12)
Min Hole Depth - 70mm
Min Over Drill Depth - 20mm
Min. Embed Depth - 50mm
Max. Fixture Thickness - 80mm
Drill Bit Dia. for clearance - 12mm (to prevent binding when tightening bolt)
Head Type - Hex Head, 17mm (Across Flats)
Driver Type - Impact driver, socket, spanner
Max Tightening Torque - 60Nm

A simple contempory handrail bracket, used for fixing handrails to walls and posts.

Wall fixing plate: 58mm diameter
Handrail fixing plate: 24 x 60mm
Bracket Length: 65mm (from wall to centre of handrail fixing plate)
Screw holes to suit 5.0mm countersunk screws
Electro-galvanised finish

Folded eye bolt, used for straining and tightening wires.

- Length: 200mm (to centre of eye)
- ⅜" Imperial thread (approx. 9mm thick)
- Internal eye diameter 15mm
- Includes 2 nuts & 2 Washers
- Bright Zinc Plated finish

Mild steel threaded bar / studding.

- M8 (metric 8mm) thread diameter
- 1.0m length
- Mild steel grade 4.6
- Bright Zinc Plated finish (BZP)
- Nuts & washers sold separately

Folded eye bolt, used for straining and tightening wires.

- Length: 150mm (to centre of eye)
- ⅜" Imperial thread (approx. 9mm thick)
- Internal eye diameter 15mm
- Includes 2 nuts & 2 Washers
- Bright Zinc Plated finish

Metal brace for strengthening corners. Can be used for internal or external corners.
Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole.
Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.5mm
Width: 24mm
Length: 150mm x 150mm
Drill Holes: 7.0mm (x6)