Fixings & Metalwork

47mm Truss Clip

Galvanised Truss Clip for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for securing 47mm wide timber
- Overall Width - 105mm (including fixing wings)
- Length - 100mm

Install using 3.75 x 30mm square twist nails
12 nail holes / truss clip
1kg square twist nails installs approx. 29 truss clips

Stock Availability: 207 in stock

£0.59 Inc. VAT

47mm Ridge Rafter Connector

The RR ridge rafter connector provides alignment control and correct nailing locations. The RR47 may be used with any rafter slope up to 30°. Galvanised for corrosion resistance.

For back-to-back installations, the minimum width of the ridge plate is 38mm. Secure in place using 3.75 x 30mm square twisted nails.

Measurements (Ref. image 3):
A: 47mm
B: 83mm
C: 33mm
D: 114mm
t (Thickness): 1.2mm

Fixing Holes:
Header: 4mm (x4)
Joist: 4mm (x4)

Nationwide delivery is available on this product, call 0117 967 4382 for details or submit a contact form below.

Stock Availability: 129 in stock

£2.33 Inc. VAT

50mm Corner Brace

Metal brace for strengthening corners. Can be used for internal or external corners.
Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole.
Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 1.5mm
Width: 16mm
Length: 50mm x 50mm
Fixing Holes: 5.0mm (x4)

Stock Availability: 147 in stock

From £0.19 Inc. VAT

75mm Corner Brace

Metal brace for strengthening corners. Can be used for internal or external corners.
Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole.
Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 1.8mm
Width: 20mm
Length: 75mm x 75mm
Drill Holes: 5.0mm (x6)

Stock Availability: 112 in stock

From £0.29 Inc. VAT

100mm Corner Brace

Metal brace for strengthening corners. Can be used for internal or external corners.
Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole.
Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.0mm
Width: 24mm
Length: 100mm x 100mm
Drill Holes: 6.0mm (x6)

Stock Availability: 48 in stock

From £0.61 Inc. VAT

150mm Corner Brace

Metal brace for strengthening corners. Can be used for internal or external corners.
Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole.
Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.5mm
Width: 24mm
Length: 150mm x 150mm
Drill Holes: 7.0mm (x6)

Stock Availability: 67 in stock

From £1.48 Inc. VAT

Adjustable Reinforced Angle Bracket - EFIXR553

The Simpson Strong-Tie EFIXR553, is a light Reinforced Angle Bracket (reinforced in corner). A light, sturdy, versatile metal bracket for a wide range of applications. Galvanised for corrosion resistance.

Thickness: 2.0mm
Width: 30mm
Length: 50mm x 54mm
Fixing Holes: 5.0mm (x8),
Obround Slot: 6.5mm x 30mm (on 50mm flange)
Obround Slot: 8.5mm x 30mm ( on 54mm flange)

Stock Availability: 227 in stock

From £0.65 Inc. VAT

Light Reinforced Angle Bracket - EA554

The Simpson Strong-Tie EA554, is a light yet sturdy Reinforced Angle Bracket (reinforced in corner). A metal bracket for strengthening corners and connecting a wide range items. Galvanised for corrosion resistance.

Thickness: 2.0mm
Width: 40mm
Length: 53mm x 53mm
Fixing Holes: 11.0mm (x2) + 5.0mm (x8)

Stock Availability: 159 in stock

From £1.04 Inc. VAT

Heavy Duty Angle Bracket - ABR90

The Simpson Strong-Tie ABR90 (previously E2/2.5/7090) is a heavy-duty reinforced angle bracket (reinforced in corner) for many applications. Galvanised for corrosion resistance.

Measurements (Ref. image 2):
A: 90mm
B: 90mm
C: 65mm
Thickness: 2.5mm
Fixing Holes: 11.5mm (x2) + 5.0mm (x20)

Stock Availability: 152 in stock

From £2.50 Inc. VAT

Stair Tread Angle - TA9Z-R

The Simpson Strong-Tie TA9Z-R Staircase Angle is a heavy-duty bracket used to attach stair treads to stair stringers, eliminating the need for labour intensive notching of stringers. Galvanised for corrosion resistance.

Thickness: 2.5mm
Width: 40mm x 40mm (max)
Length: 210mm
Fixing Holes: 7.0mm (x5)

Nationwide delivery is available on this product, call 0117 967 4382 for details or submit a contact form below.

Stock Availability: 98 in stock

From £4.13 Inc. VAT

30mm Fence Panel L-Clip

30mm Fence Panel L-Clip, a useful panel clip for discreet fixing that can only be seen from one side. Can also be used to fix gravel boards, as well as many uses as a general purpose corner bracket.

- Angle: 30 x 30mm
- Height: 50mm
- Galvanised Steel

Stock Availability: 169 in stock

£0.60 Inc. VAT

75mm Corner Plate

Metal corner plate for strengthening corners. Pre-drilled fixing holes for use with countersunk screws.
Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.0mm
Width: 16mm
Length: 75mm x 75mm
Fixing Holes: 5.5mm (x4)

Stock Availability: 60 in stock

£0.29 Inc. VAT

100mm Corner Plate

Metal corner plate for strengthening corners. Pre-drilled fixing holes for use with countersunk screws.
Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.0mm
Width: 16mm
Length: 100mm x 100mm
Fixing Holes: 6.0mm (x6)

Stock Availability: 63 in stock

£0.50 Inc. VAT

75mm T Plate

Steel T-plate suitable for a range of timber frame building uses. Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.0mm
Overall Width: 75mm x 16mm
Overall Length: 75mm x 16mm
Fixing Holes: 5.0mm (x5)

Stock Availability: 65 in stock

£0.60 Inc. VAT

100mm T Plate

Steel T-plate suitable for a range of timber frame building uses. Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.0mm
Overall Width: 100mm x 19mm
Overall Length: 100mm x 19mm
Fixing Holes: 6.0mm (x5)

Stock Availability: 58 in stock

£0.94 Inc. VAT

40mm x 120mm Nail Plate

Simpson Strong-Tie NP15/80/140 nail plates can be used in various applications, in particular for jointing or the connection of wood elements in the same plane.

Thickness: 1.5mm
Width: 40mm
Length: 120mm
Fixing Holes: 5.0mm (x9)

Stock Availability: 61 in stock

£0.76 Inc. VAT

80mm x 140mm Nail Plate

Simpson Strong-Tie NP15/80/140 nail plates can be used in various applications, in particular for jointing or the connection of wood elements in the same plane.

Thickness: 1.5mm
Width: 80mm
Length: 140mm
Fixing Holes: 5.0mm (x25)

Stock Availability: 91 in stock

£1.15 Inc. VAT

75mm Mending Plate

A mild steel plate with fixing holes used for strengthening and repairs.
Pre-drilled for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 1.8mm
Width: 18mm
Length: 75mm
Fixing Holes: 5.0mm (x4)

Stock Availability: 135 in stock

From £0.18 Inc. VAT

100mm Mending Plate

A mild steel plate with fixing holes used for strengthening and repairs.
Pre-drilled fixing holes for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.0mm
Width: 19mm
Length: 100mm
Fixing Holes: 5.0mm (x4)

Stock Availability: 90 in stock

From £0.31 Inc. VAT

150mm Mending Plate

A mild steel plate with fixing holes used for strengthening and repairs.
Pre-drilled for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.5mm
Width: 26mm
Length: 150mm
Fixing Holes: 5.0mm (x4)

Stock Availability: 51 in stock

From £0.68 Inc. VAT

Framing Anchor - A34

The Simpson Stong-Tie A34 Framing Anchor is a versatile bracket for many timber framing needs. The speed prong allows you to quickly hold the anchor in place while you get the rest of the fixings in. Galvanised for corrosion resistance.

Thickness: 1.0mm
Width: 34mm x 39mm
Length: 63mm
Fixing Holes: 3.5mm (x8)

Stock Availability: 91 in stock

£0.91 Inc. VAT

Framing Anchor With Bending Straps - A35

The Simpson Strong-Tie A35 anchor’s exclusive bending slot allows instant, accurate bending on site for all two and three-way ties. This framing anchor has a speed prong allowing you to quickly hold the anchors in place while you get the rest of the fixings in.

Thickness: 1.0mm
Width: 36mm x 37mm
Length: 113mm
Slot in Corner: 41mm
Fixing Holes: 3.5mm (x12)

Stock Availability: 105 in stock

£1.07 Inc. VAT

600mm Heavy Engineered Strap

The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of floor joists and the bottom chords of trusses without the need for notching.

Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.

Stock Availability: 36 in stock

£2.63 Inc. VAT

1000mm Heavy Engineered Strap

The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of floor joists and the bottom chords of trusses without the need for notching.

Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.

Stock Availability: 25 in stock

£4.38 Inc. VAT

1200mm Heavy Engineered Strap

The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of floor joists and the bottom chords of trusses without the need for notching.

Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.

Stock Availability: 31 in stock

£5.26 Inc. VAT

1500mm Heavy Engineered Strap

The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of floor joists and the bottom chords of trusses without the need for notching.

Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.

Stock Availability: 20 in stock

£7.18 Inc. VAT

1000mm x 28mm x 2mm Twisted Strap

Pre-galvanised twisted restraint straps, designed to building regulations for vertical restraint.

Strap thickness: 2mm
Strap width: 28mm
Strap total length: 1000mm
Distance from top of strap to top of twist: 100mm
6mm holes along the length of the strap

Stock Availability: 5 in stock

£4.13 Inc. VAT

1000mm x 28mm x 2mm Flat Strap

For vertical and horizontal restraint when connecting timber floor and roof systems to masonry walls.

Stock Availability: 59 in stock

£4.62 Inc. VAT

1000mm x 28mm x 4mm Flat Strap

For vertical and horizontal restraint when connecting timber floor and roof systems to masonry walls.

Stock Availability: 46 in stock

£7.19 Inc. VAT

20mm x 10m Fixing Band

Galvanised fixing band FB20A has many building & DIY uses.

- Flexible galvanised steel can be easily shaped by hand
- 1mm thick
- 20mm Wide
- 10m Coil
- Includes three hole options to suit a variety of fixings

Stock Availability: 16 in stock

£11.12 Inc. VAT

Elevated Post Base - PPA100

A quality Post Base made by Simpson Strong-Tie. Used to raise timber posts and timber framework above ground level, which prevents rotting caused by moisture from ground contact. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

- Steel S235JR according to NF EN 10025
- Hot-dip galvanized according to NF EN ISO 1461
- Total Height - 100mm
- Tubular Core - 48mm diameter
- Top plate - 100 x 100mm x 4mm
- Base plate - 130 x 130mm x 4mm
- Maximum post cross section - 200 x 200mm
- 11.0mm fixing holes (x8)

Stock Availability: 18 in stock

£32.62 Inc. VAT

Adjustable Elevated Post Base - PPRC

A quality Post Base made by Simpson Strong-Tie. Used to raise timber posts and timber framework above ground level, which prevents rotting caused by moisture from ground contact. The height/level of the square support plate can easily be adjusted after installation which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

- Dichromate coated galvanised mild steel
- Height Adjustable: 100mm→150mm
- Threaded Core: 20mm diameter
- Top plate: 100 x 100mm x 5mm
- Base plate: 130 x 130mm x 5mm
- 12mm fixing holes

Stock Availability: 20 in stock

£55.28 Inc. VAT

80mm Fencemate Adjustable Bolt Down Post Support

A post support fitting for installing timber posts and timber framework. The timber sits on the Post Support out of ground contact, which prevents rotting due to moisture from the ground. The height/level of the square support plate can easily be adjusted which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

Installation: drill a 22mm diameter hole in the end of the timber post for the threaded bar to fit into, the depth of hole will vary depending on how much elevation is required. The post should sit firmly over the threaded bar down to the square support plate. The two nuts are tightened against each other to lock the support plate in the required position. The bottom of the post support is designed to be bolted down to a concrete base, we recommend using M10 Thunder Bolts.

- Welded construction, galvanised steel
- Total Height - 255mm
- Threaded bar - 22mm diameter
- Square support plate - 80 x 80mm x 4.5mm
- Bolt Down Plate - 80 x 80mm x 4.5mm
- 11mm fixing holes (x8)

Stock Availability: 19 in stock

£17.71 Inc. VAT

110mm Fencemate Adjustable Bolt Down Post Support

A post support fitting for installing timber posts and timber framework. The timber sits on the Post Support out of ground contact, which prevents rotting due to moisture from the ground. The height/level of the square support plate can easily be adjusted which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

Installation: drill a 22mm diameter hole in the end of the timber post for the threaded bar to fit into, the depth of hole will vary depending on how much elevation is required. The post should sit firmly over the threaded bar down to the square support plate. The two nuts are tightened against each other to lock the support plate in the required position. The bottom of the post support is designed to be bolted down to a concrete base, we recommend using M10 Thunder Bolts.

- Welded construction, galvanised steel
- Total Height - 255mm
- Threaded bar - 22mm diameter
- Square support plate - 100 x 100mm x 4.5mm
- Bolt Down Plate - 100 x 100mm x 4.5mm
- 11mm fixing holes (x8)

Stock Availability: 11 in stock

£20.69 Inc. VAT

Ground Socket To Concrete- In - Galvanised

A post support fitting for installing timber posts. The post sits on the socket out of ground contact, which prevents the timber from rotting due to moisture from the ground. It is suitable for structurally supported timber posts that need to last a long time e.g. for a basic timber porch or lean-to. Not recommended for free standing posts e.g. fence posts.

Installation: drill an 18mm diameter hole in the end of the timber post for the Ground Socket to fit into, the hole needs to be at least 155mm deep for the post to sit firmly over the metal dowel down to the square support plate. The bottom of the ground socket is designed to be concreted into the ground, the cross bar ensures a secure fixing within the concrete.

- Welded construction, galvanised steel
- Total length - 600mm
- Fixing Dowel - 18mm diameter x 150mm
- Square support plate 100 x 100mm x 10mm
- Concrete-in section below support plate - 18mm diameter x 450mm
- Concrete-in 'cross bar' - 9mm diameter x 110mm across full width

Stock Availability: 2 in stock

£20.60 Inc. VAT

65mm Handrail Bracket

A simple contempory handrail bracket, used for fixing handrails to walls and posts.

Wall fixing plate: 58mm diameter
Handrail fixing plate: 24 x 60mm
Bracket Length: 65mm (from wall to centre of handrail fixing plate)
Screw holes to suit 5.0mm countersunk screws
Electro-galvanised finish

Stock Availability: 10 in stock

£1.80 Inc. VAT

Polyethylene Damp Proof Course - 100mm x 30m

Cost effective damp proof course for domestic construction
Suitable for use in horizontal and vertical applications
Safe and clean to handle and flexible even at low temperatures

Stock Availability: 12 in stock

£4.78 Inc. VAT

Wondervent Breathable Membrane 1.0m x 50m - 140gsm

BBA certified breather membrane. For use in cold non-ventilated pitched roof systems, also used in timber frame walls with timber, tile or slate outter cladding.

- 1m x 50m roll
- 140gsm
- Full specs. in the full description below
- BBA certificates in the downloads tab below

* Colour may vary

Stock Availability: 22 in stock

£54.78 Inc. VAT

500ml Wood Adhesive

Everbuild 502 All Purpose Weatherproof Wood Adhesive is an effective resin based adhesive for all wood bonding. Suitable for internal and external use, it provides a high strength, impact resistant bond.
Ideal for all general woodworking and joinery uses, this adhesive is fast curing and dries clear.

Stock Availability: 15 in stock

£6.49 Inc. VAT

5 Minute Polyurethane Wood Glue Gel - 310ml

The Everbuild Lumberjack 5min Polyurethane Wood Adhesive offers exceptional bond strength to wood and most common building surfaces. Suitable for bonding all common wood types (hard, soft, exotic, painted). It will also bond Formica, polystyrene, PU foam, metal and glass wool and various plastics (including PVC) to porous surfaces. These products also adhere to stone, concrete, brick and masonry. Products foam slightly on application to fill small gaps and increase overall bond strength.

Suitable for both internal and external use, with excellent weathering and ageing properties. They are also resistant to chemicals. Conforms to EN 204. D4 Strength.

Areas For Use

• General wood jointing and construction
• Window and door frame manufacture
• Door manufacture
• Furniture manufacture
• Construction of staircases and ladders
• As a high quality insulation adhesive for foam/glass wool/fibre boarding

The Everbuild Lumberjack 5min Polyurethane Wood Adhesive Gel is a thixotropic, transparent, gap filling gel which sets hard in just 5 minutes. Particularly suitable for equipment manufacture and production line applications where rapid handling is required. Conforms to EN 204. D4 Strength.

Stock Availability: 10 in stock

£9.49 Inc. VAT

General Pupose Silicone - Clear

Everbuild General Purpose Silicone is a Multi-Purpose acetoxy cure silicone sealant that cures quickly to provide a permanently flexible, high strength waterproof seal. It contains a powerful anti-fungicide to prevent mould growth

BENEFITS
- Permanently flexible.
- Anti-fungal formula - prevents mould growth.
- Quick curing - low dirt pick up.
- Low viscosity for fast application.

AREAS FOR USE
- Sealing glass to glass.
- Sealing glass to aluminium and metal sealing.
- Sealing around baths, showers, basins and other sanitary ware.
- As an adhesive for fixing PVCu trims, cladding and panels.
- Sealing around worktops and laminates.
- Cap glazing to metal, timber and PVCu window frames, and pointing round window and door frames.
- For aluminium gutter sealing.
- General draughtproofing.

Stock Availability: 6 in stock

£4.74 Inc. VAT

1 Litre Black Jack Felt Adhesive

A cold applied oxidised bitumen based adhesive.
Used to bond roofing felt to most surfaces, sealing felt laps and as a cold gritting solution for bonding mineral chippings

Approx. coverage: 1.4m² / litre

Stock Availability: 9 in stock

£10.00 Inc. VAT

2.5 Litre Black Jack Felt Adhesive

A cold applied oxidised bitumen based adhesive.
Used to bond roofing felt to most surfaces, sealing felt laps and as a cold gritting solution for bonding mineral chippings

Approx. coverage: 1.4m² / litre (3.5m² / tin)

Stock Availability: 5 in stock

£19.99 Inc. VAT

300ml Exocet Polyester Resin (Includes One Nozzle)

Injection resin used for anchoring threaded bar into concrete, stone, masonry, brickwork and hollow masonry.

- One mixer nozzle supplied per 300ml tube, extra nozzles available to purchase separately
- Two part resin, apply in one single action with a caulking gun
- Suitable for indoor and outdoor applications
- Colour: Grey

Stock Availability: 18 in stock

£8.80 Inc. VAT

Spare Polyester Resin Mixer Nozzle

Spare nozzle for Exocet Polyester Resin

Stock Availability: 15 in stock

£1.04 Inc. VAT

50mm x 50m Mega Tape - Black

The ultimate All Purpose Duct Tape, top quality cloth with aggressive natural rubber adhesive. Tough, durable and waterproof, for thousands of applications on site, in the home and industry.

Stock Availability: 2 in stock

£7.60 Inc. VAT

Black Cable Ties 140mm x 3.6mm (Qty. 100)

Cable ties manufactured from high quality virgin nylon 6.6. Use black ties when secured in direct sunlight

Stock Availability: 5 in stock

£4.00 Inc. VAT

Black Cable Ties 200mm x 4.8mm (Qty. 100)

Cable ties manufactured from high quality virgin nylon 6.6. Use black ties when secured in direct sunlight

Stock Availability: 4 in stock

£4.00 Inc. VAT

Black Cable Ties 300mm x 4.8mm (Qty. 100)

Cable ties manufactured from high quality virgin nylon 6.6. Use black ties when secured in direct sunlight

Stock Availability: 4 in stock

£5.00 Inc. VAT

Netting Clips, 1000 Pack - Galvanised

Pack of 1000 galvanised hog rings, for use with FP222 fencing pliers.
Netting clips (also known as Hog Rings) can be used to attach wire mesh and chainlink fencing to line wires, also used for mesh jointing and repairs.

Closed ring diameter: 5 - 11mm

Stock Availability: 8 in stock

£8.99 Inc. VAT

Payment options