Tools, Safety & Workwear

These IRWIN Gilbow straight cutting snips have accurately ground edges that ensure the material being cut does not slip out of the jaws and become damaged.
The hollow ground jaw faces provide a longer life to the cutting edge.

Gilbow tin snips are jointed with a nut and bolt design essential in ensuring the longest possible life of the joint, whilst keeping a good easy smooth cutting movement.
Irwin Gilbow snips and shears have a great cutting capability which is much greater than the strength of the user and will provide a good, clean, easy cut edge to any workpiece.
The original Gilbow cutting snips were first designed many years ago, and have dominated the sheet metal cutting industry to such an extent that today, snips and shears are referred to as 'Gilbows'.

IRWIN® HSS Drill Bit Hex Shank Bit for drilling into wood, metal and plastic. Made from high steel speed (HSS) for durability. Its hexagon shank improves grip in the connector. The quick change system allows for quicker change between drilling and driving.

Pack contains:
1 x IRWIN® HSS Drill Bit Hex Shank Bit 4.0mm - 54mm Working Length.
1 x IRWIN® HSS Drill Bit Hex Shank Bit 5.0mm - 62mm Working Length.
1 x IRWIN® HSS Drill Bit Hex Shank Bit 6.0mm - 70mm Working Length.

The IRWIN® Impact Pro Performance Bit Set has been engineered for maximum durability and turning force when used in extreme applications. The full fit head eliminates wobble and screw head roundings. With a contoured area, so the bit tip flexes with the torque of the impact driver. Flex optimised to transfer maximum torque through the screw and maximise life.

Supplied in a robust, modular storage case. Contains:

7 x 57mm Phillips Bits: PH1(x2), PH2(x4), PH3
8 x 57mm Pozi Bits: PZ1(x2), PZ2(x5), PZ3
7 x 57mm TORX Bits: TX20(x4), TX30(x3)

The IRWIN® Impact Pro Performance Magnetic Torsion Bit Holder has an extended torsion zone that helps to maximise bit life and turning force when used in extreme applications. For use with impact drivers and 25mm impact bits.

Length: 75mm

Quick change Blue Groove 4X Quick Change Extensions. They are used with 4X flat bits when extra drilling depth is required.

Irwin Magnetic Screw Drive Guide for better fastener retention.
Reduces fastener slipping and wobble.

Length: 80mm.
Diameter: 9.5mm.

These Irwin Speedhammer Plus Chisels are for use with SDS Plus machines. They can be used on concrete and masonry and have a grey sandblasted professional finish.

Suitable for a wide range of applications: breaking through, breaking up concrete, light demolition work and chasing of channels for pipes and electrical conduit.

1 x Irwin Speedhammer Plus Chisel Point 250mm

These Irwin Speedhammer Plus Chisels are for use with SDS Plus machines. They can be used on concrete and masonry and have a grey sandblasted professional finish.

Suitable for a wide range of applications: breaking through, breaking up concrete, light demolition work and chasing of channels for pipes and electrical conduit.

1 x Irwin Speedhammer Plus Flat Chisel 20mm Length 250mm

These Irwin Speedhammer Plus Chisels are for use with SDS Plus machines. They can be used on concrete and masonry and have a grey sandblasted professional finish.

Suitable for a wide range of applications: breaking through, breaking up concrete, light demolition work and chasing of channels for pipes and electrical conduit.

1 x Irwin Speedhammer Plus Spade Chisel 40mm Length 250mm

Designed to streamline your work, this versatile tool combines wire cutters, hammer, gripper, crimper and staple remover

Suitable for all road marking systems
High colour pigment & fast drying

YOU MUST BE OVER THE AGE OF 16 TO PURCHASE THIS PRODUCT

Suitable for all road marking systems
High colour pigment & fast drying

YOU MUST BE OVER THE AGE OF 16 TO PURCHASE THIS PRODUCT

The Makita D-03888 SDS Plus Drill Bits, in a 5 Piece Set, are suitable for masonry and concrete. The solid carbide tip with centring point and optimised flutes offers fast drilling speeds in a contractors, low cost option. The 2 Cutter TCT tip is manufactured to DIN 8039 standards.

Contains: 1 x 5.5 x 110mm, 1 x 7.0 x 110mm, 1 x 6.0 x 160mm, 1 x 7.0 x 160mm and 1 x 8.0 x 160mm.

These Master Lock ratchet tie-downs have been specially designed to secure your luggage or other loads to cars, van roof racks or trailers.

The long ratchet tie downs with black Monster Weave™ webbing for durability have integrated S-Hooks with clips to aid installation. The silver protectant finish not only delivers a richer appearance, but is also 3 times more corrosion resistant than standard webbing.

TUV certified.

Capacity: Lashing: 400kg, Max: 800kg.

General purpose heavy duty blades in dispenser
High quality SK2 steel
Extra flexible and durable

YOU MUST BE OVER THE AGE OF 18 TO PURCHASE THIS PRODUCT