Hand Tools

General purpose carbon steel. Ideal for cutting mild steel, brass, aluminium, copper and similar materials.

Pack of 5 blades consisting of:

1 x 300mm (12in) x 18 tpi.
3 x 300mm (12in) x 24 tpi.
1 x 300mm (12in) x 32 tpi.

The Stanley DynaGrip™ Nail Punch is induction heat treated for safety and improved performance. With a cupped tip for easy alignment. Its long length allows for setting nails in hard to reach places. Fitted with a over-moulded DynaGrip™ grip, to help dampen vibrations and reduce slipping during use. The grip is colour coded by tip size for easy identification.

Used for driving finish nails beneath trim work.

This set of 3 punches contains the following tip sizes:
1/32in (0.8mm) Yellow Sleeve
1/16in (1.6mm) Grey Sleeve
3/32in (2.4mm) Red Sleeve

Overall Length: 125 mm / 5in

Roughneck® Gorilla V-Series Claw Hammer offers increased striking power and reduced vibration. Manufactured from drop-forged, hardened and tempered steel. The unique V-Shock twin-beam girder shaft acts as a damper, resulting in reduced shock and vibration transmission, and is further controlled by an air-cushioned grip.

Reduced weight in the shaft transfers the centre of gravity towards the head, resulting in improved balance and reduced effort. The magnetic nail holder makes for effortless starting, particularly in hard-to-reach areas, whilst the mini-claw allows for embedded nails to be removed with ease. There is a lanyard hole in the base of the handle, ideal for safe and secure tethering when working at height.

Roughneck® Gorilla V-Series Claw Hammer offers increased striking power and reduced vibration. Manufactured from drop-forged, hardened and tempered steel. The unique V-Shock twin-beam girder shaft acts as a damper, resulting in reduced shock and vibration transmission, and is further controlled by an air-cushioned grip.

Reduced weight in the shaft transfers the centre of gravity towards the head, resulting in improved balance and reduced effort. The magnetic nail holder makes for effortless starting, particularly in hard-to-reach areas, whilst the mini-claw allows for embedded nails to be removed with ease. There is a lanyard hole in the base of the handle, ideal for safe and secure tethering when working at height.

Non-slip grip handle with shock reduction
Precision balanced
Forged, one piece steel construction
High quality steel for durability

Non-slip grip handle with shock reduction
Precision balanced
Forged, one piece steel construction
High quality steel for durability

These wedges are designed for use in conjunction with the correct wooden handle when replacing damaged handles on hammers, axes and other striking tools.

Includes malleable steel hammer wedges and wooden wedges and when fitted correctly, they provide a secure and safe attachment of a striking head to a wooden handle.

Kit consists of

2 Steel Wedges : 12mm Width (Size 1)
1 Wooden Wedge : 17 x 25mm
Suitable for head weights 4oz to 1lb

2 Steel Wedges : 15mm Width (size 2)
1 Wooden Wedge : 25 x 35mm
Suitable for head weights 1lb to 2.5lbs

2 Steel Wedges : 18mm width (size 3)
1 Wooden wedge : 30 x 30mm
Suitable for head weights 3lb to 7lbs

2 steel wedges : 21mm width (size 4)
1 wooden wedge : 30 x 40mm
Suitable for head weights 10lb to 28lbs

Note Hammer wedges are NOT suitable for use with fibreglass replacement handles.

The Steelmaster claw hammer has a heat treated and polished carbon steel head for strength, durability and safety. A seamless, oval tubular steel shaft provides strength and balance and the vinyl soft-grip ergonomic handle gives comfort and grip in use.

Designed to streamline your work, this versatile tool combines wire cutters, hammer, gripper, crimper and staple remover

The Faithfull fencing pliers are ideally suited for fencing and wire work. These versatile pliers perform the following functions: Nail extraction, nail driving, staple extraction, wire cutting, wire pulling and wire squeezing.

The Rapid FP222 is part of the 'Smart Gardener' range of wire fencing pliers. Ideal for fixing thicker wire netting and chain link fencing to fence wires, the FP222 provides secure, reliable results and can be used for both domestic and professional requirements. It has an ergonomic soft grip trigger and handle lock for easy storage. The integrated magazine is quick and easy to load.

Compatible with Rapid VR22 hog rings & our stocked Netting Clips
Fix to diameter 5-11mm.
Covered by a 2 year guarantee.

Designed to grip and cut, the front section of the serrated jaws are ideal for gripping flat surfaces and the serrated sections match the profiles of rods, pipes and tubing.
The induction hardened jaws are suitable for cutting a wide range of materials including medium and medium hard wire.
Made from chrome vanadium steel and fitted with cushion grip sleeves for user comfort.

Diagonal Cutting Pliers are ideal for cutting medium to medium-hard wire close to the flat surface.The tapered head profile is ideal for accessing confined spaces.
The cutting edges on the jaws are induction hardened and individually processed for maximum performance. Made from chrome vanadium steel and fitted with cushion grip sleeves for user comfort.

Faithfull Carpenter's Pincers are designed to grip and extract nails and tacks without cutting them or damaging the wood.

Manufactured from chrome vanadium steel with a rustproof, satin nickel finish and fitted with cushion grip sleeves for user comfort.

Tested and certified to the GS standard. ROHS compliant.

These IRWIN Gilbow straight cutting snips have accurately ground edges that ensure the material being cut does not slip out of the jaws and become damaged.
The hollow ground jaw faces provide a longer life to the cutting edge.

Gilbow tin snips are jointed with a nut and bolt design essential in ensuring the longest possible life of the joint, whilst keeping a good easy smooth cutting movement.
Irwin Gilbow snips and shears have a great cutting capability which is much greater than the strength of the user and will provide a good, clean, easy cut edge to any workpiece.
The original Gilbow cutting snips were first designed many years ago, and have dominated the sheet metal cutting industry to such an extent that today, snips and shears are referred to as 'Gilbows'.