- Plastic colour coded flat glazing packers (28mm x 100mm) - Mixed pack of 6 thicknesses - Designed for aligning and levelling double-glazed sealed units
A post support fitting for installing timber posts. The post sits on the socket out of ground contact, which prevents the timber from rotting due to moisture from the ground. It is suitable for structurally supported timber posts that need to last a long time e.g. for a basic timber porch or lean-to. Not recommended for free standing posts e.g. fence posts.
Installation: drill an 18mm diameter hole in the end of the timber post for the Ground Socket to fit into, the hole needs to be at least 155mm deep for the post to sit firmly over the metal dowel down to the square support plate. The bottom of the ground socket is designed to be concreted into the ground, the cross bar ensures a secure fixing within the concrete.
- Welded construction, galvanised steel - Total length - 600mm - Fixing Dowel - 18mm diameter x 150mm - Square support plate 100 x 100mm x 10mm - Concrete-in section below support plate - 18mm diameter x 450mm - Concrete-in 'cross bar' - 9mm diameter x 110mm across full width
Pack of 1000 galvanised hog rings, for use with FP222 fencing pliers. Netting clips (also known as Hog Rings) can be used to attach wire mesh and chainlink fencing to line wires, also used for mesh jointing and repairs.
Pack of 1000 green (PVC coating) Netting Clips for use with FP222 Fencing Pliers. Netting clips (also known as Hog Rings) can be used to attach wire mesh and chainlink fencing to line wires, also used for mesh jointing and repairs.
Cost effective damp proof course for domestic construction Suitable for use in horizontal and vertical applications Safe and clean to handle and flexible even at low temperatures
Metal brace for strengthening corners. Can be used for internal or external corners. Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole. Bright Zinc Plated (BZP) for corrosion resistance.
Metal brace for strengthening corners. Can be used for internal or external corners. Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole. Bright Zinc Plated (BZP) for corrosion resistance.
Metal brace for strengthening corners. Can be used for internal or external corners. Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole. Bright Zinc Plated (BZP) for corrosion resistance.
Metal brace for strengthening corners. Can be used for internal or external corners. Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole. Bright Zinc Plated (BZP) for corrosion resistance.