Fixings & Metalwork

Spax A2 Stainless Steel Decking Screw, ideal for use with hardwood and softwood decking (pre-drilling may be required).

- Countersunk, flush fitting, cylindrical head.
- 4CUT point which minimises splitting & eliminates the need for pre-drilling in softwood.
- T-STAR plus drive; TX25 Torx bit (sold separately).
- Two-part thread ensures that boards remain securely fixed to the substructure in all weather conditions.
- A2 Stainless Steel; A2 stainless steel offers a high level of protection against corrosion and medium strength, however, they have low resistance to saltwater and acids. This is a reliable, durable choice for outdoor applications in non-coastal areas.

These Stainless Steel lost-head screws are similar in size to a lost-head nail. They are designed to be used as a hidden fixing for tongue & groove flooring and timber cladding but are perfect for many other projects. Tongue-Tite Plus is intended to be installed at a 30-45 degree angle through the tongue of the board, allowing the groove to fit over the head of the screw. This screw can also be used to face-fix boards, the small head is barely visible when when driven just below the timber surface.

Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.

TX10 screwdriver bit included in the box.
Screw Head Diameter = 4.5mm

These Stainless Steel lost-head screws are similar in size to a lost-head nail. They are designed to be used as a hidden fixing for tongue & groove flooring and timber cladding but are perfect for many other projects. Tongue-Tite Plus is intended to be installed at a 30-45 degree angle through the tongue of the board, allowing the groove to fit over the head of the screw. This screw can also be used to face-fix boards, the small head is barely visible when when driven just below the timber surface.

Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.

TX10 screwdriver bit included in the box.
Screw Head diameter = 4.5mm

These Stainless Steel lost-head screws are similar in size to a lost-head nail. They are designed to be used as a hidden fixing for tongue & groove flooring and timber cladding but are perfect for many other projects. Tongue-Tite Plus is intended to be installed at a 30-45 degree angle through the tongue of the board, allowing the groove to fit over the head of the screw. This screw can also be used to face-fix boards, the small head is barely visible when when driven just below the timber surface.

Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.

TX10 screwdriver bit included in the box.
Screw Head Diameter = 4.5mm

These Stainless Steel lost-head screws are similar in size to a lost-head nail. They are designed to be used as a hidden fixing for tongue & groove flooring and timber cladding but are perfect for many other projects. Tongue-Tite Plus is intended to be installed at a 30-45 degree angle through the tongue of the board, allowing the groove to fit over the head of the screw. This screw can also be used to face-fix boards, the small head is barely visible when when driven just below the timber surface.

Tongue-Tite Plus is a stainless steel screw which is suitable for internal & external use. These screws have a narrow countersunk head with TX10 drive.
Its' single course thread has been designed to eliminate the ream out of the timber, giving high pull out retention, which helps to prevent squeaky floor boards.
The torx drive provides grip and control when fitting, the narrow countersunk head gives a neat flush fix to allow the next board to sit in place.

TX10 screwdriver bit included in the box.
Screw Head Diameter = 4.5mm

Hex head coach screw, suitable for fixing into timber, can fix into brickwork and masonry with an M6 plug. M6 washers sold separately.

- Length excludes 4mm bolt head
- 55mm screw thread, 15mm unthreaded
- Bright Zinc Plated finish (BZP)
- Pre-drill timber with 2mm - 4mm pilot hole
- Hex Head fits a 10mm spanner

Hex head coach screw, for heavy-duty applications. Suitable for fixing into timber, can fix into brickwork and masonry with an M8 plug . M8 washers sold separately.

- Length excludes 5mm bolt head
- Bright Zinc Plated finish (BZP)
- Pre-drill timber with 4 - 6mm pilot hole
- Hex Head fits a 13mm Spanner

Hex head coach screw, for heavy-duty applications. Suitable for fixing into timber, can fix into brickwork and masonry with an M10 plug. M10 washers sold separately.

- Length excludes 7mm bolt head
- 65mm screw thread, 15mm unthreaded
- Bright Zinc Plated finish (BZP)
- Pre-drill timber with 6 - 8mm pilot hole
- Hex Head fits a 17mm Spanner

Hex head coach screw, for heavy-duty applications. Suitable for fixing into timber, can fix into brickwork and masonry with an M10 plug. M10 washers sold separately.

- Length excludes 7mm bolt head
- 85mm screw thread, 15mm unthreaded
- Bright Zinc Plated finish (BZP)
- Pre-drill timber with 6 - 8mm pilot hole
- Hex Head fits a 17mm Spanner

Hex head coach screw, for heavy-duty applications. Suitable for fixing into timber, can fix into brickwork and masonry with an M10 plug. M10 washers sold separately.

- Length excludes 7mm bolt head
- 95mm screw thread, 35mm unthreaded
- Bright Zinc Plated finish (BZP)
- Pre-drill timber with 6 - 8mm pilot hole
- Hex Head fits a 17mm Spanner

Hex head coach screw, for heavy-duty applications. Suitable for fixing into timber, can fix into brickwork and masonry with an M10 plug. M10 washers sold separately.

- Length excludes 7mm bolt head
- 105mm screw thread, 45mm unthreaded
- Bright Zinc Plated finish (BZP)
- Pre-drill timber with 6 - 8mm pilot hole
- Hex Head fits a 17mm Spanner

Hex head coach screw, for heavy-duty applications. Suitable for fixing into timber, can fix into brickwork and masonry with an M10 plug. M10 washers sold separately.

- Length excludes 7mm bolt head
- 125mm screw thread, 55mm unthreaded
- Bright Zinc Plated finish (BZP)
- Pre-drill timber with 6 - 8mm pilot hole
- Hex Head fits a 17mm Spanner

Hex head coach screw, for heavy-duty applications. Suitable for fixing into timber, can fix into brickwork and masonry with an M10 plug. M10 washers sold separately.

- Length excludes 7mm bolt head
- 135mm screw thread, 65mm unthreaded
- Bright Zinc Plated finish (BZP)
- Pre-drill timber with 6 - 8mm pilot hole
- Hex Head fits a 17mm Spanner

Traditional round wire nails for fixing timber to timber. Large head for increased holding power.

Nail Length: 40mm
Nail gauge: 2.65mm
Average nail count = 575 /kg
Finish: Galvanised, service class 3 according to EN 10016-2
Manufactured to BS EN 10230-1

Traditional round wire nails for fixing timber to timber. Large head for increased holding power.

Nail Length: 50mm
Nail gauge: 2.65mm
Average nail count = 440 /kg
Finish: Galvanised, service class 3 according to EN 10016-2
Manufactured to BS EN 10230-1