Fixings & Metalwork

For vertical and horizontal restraint when connecting timber floor and roof systems to masonry walls.

For vertical and horizontal restraint when connecting timber floor and roof systems to masonry walls.

Galvanised fixing band FB20A has many building & DIY uses.

- Flexible galvanised steel can be easily shaped by hand
- 1mm thick
- 20mm Wide
- 10m Coil
- Includes three hole options to suit a variety of fixings

A quality Post Base made by Simpson Strong-Tie. Used to raise timber posts and timber framework above ground level, which prevents rotting caused by moisture from ground contact. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

- Steel S235JR according to NF EN 10025
- Hot-dip galvanized according to NF EN ISO 1461
- Total Height - 100mm
- Tubular Core - 48mm diameter
- Top plate - 100 x 100mm x 4mm
- Base plate - 130 x 130mm x 4mm
- Maximum post cross section - 200 x 200mm
- 11.0mm fixing holes (x8)

A quality Post Base made by Simpson Strong-Tie. Used to raise timber posts and timber framework above ground level, which prevents rotting caused by moisture from ground contact. The height/level of the square support plate can easily be adjusted after installation which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

- Dichromate coated galvanised mild steel
- Height Adjustable: 100mm→150mm
- Threaded Core: 20mm diameter
- Top plate: 100 x 100mm x 5mm
- Base plate: 130 x 130mm x 5mm
- 12mm fixing holes