Fixings & Metalwork

Square twisted nails; the recommended fixing for installation of joist hangers.

Nail length: 30mm
Nail gauge: 3.75mm
Average nail count = 350 /kg
Finish: Sherardised, service class 2

Light-duty nails /pins suited to fixing small decorative components; timber to timber. Small head for flush finish.

Pin length: 25mm
Pin gauge: 1.6mm
Average pin count = 2340 /kg (½ kg bag)
Finish: Sherardised, service class 2
Manufactured to BS EN 10230-1

Light-duty nails /pins suited to fixing small decorative components; timber to timber. Small head for flush finish.

Pin length: 40mm
Pin gauge: 1.6mm
Average pin count = 1590 /kg (½ kg bag)
Finish: Sherardised, service class 2
Manufactured to BS EN 10230-1

Short galvanised nails with an extra large clout head, designed for fixing down shed felt.
Approximately 345 nails per 500g pack.

A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.

Drill Bit Dia. - 8mm
Anchor Length - 75mm
Washer Size - 10mm (M10)
Min Hole Depth - 55mm
Min Over Drill Depth - 15mm
Min. Embed Depth - 40mm
Max. Fixture Thickness - 35mm
Drill Bit Dia. for clearance - 10mm (to prevent binding when tightening bolt)
Head Type - Hex Head, 15mm (Across Flats)
Driver Type - Impact driver, socket, spanner
Max Tightening Torque - 40Nm