Fixings & Metalwork

The Simpson Strong-Tie A35 anchor’s exclusive bending slot allows instant, accurate bending on site for all two and three-way ties. This framing anchor has a speed prong allowing you to quickly hold the anchors in place while you get the rest of the fixings in.

Thickness: 1.0mm
Width: 36mm x 37mm
Length: 113mm
Slot in Corner: 41mm
Fixing Holes: 3.5mm (x12)

The Simpson Stong-Tie A34 Framing Anchor is a versatile bracket for many timber framing needs. The speed prong allows you to quickly hold the anchor in place while you get the rest of the fixings in. Galvanised for corrosion resistance.

Thickness: 1.0mm
Width: 34mm x 39mm
Length: 63mm
Fixing Holes: 3.5mm (x8)

Plastic colour coded frame packers (45mm x 55mm) have many uses; ideal for packing-out framework, aligning kitchen units, window frames etc. Wedge shaped tips for easy insertion into gaps.

Pack contains (approx):
1mm - Yellow, quantity 25
2mm - Green, quantity 15
3mm - Blue, quantity 15
4mm - Red, quantity 15
5mm - Brown, quantity 15
6mm - Black, quantity 15

A quality Post Base made by Simpson Strong-Tie. Used to raise timber posts and timber framework above ground level, which prevents rotting caused by moisture from ground contact. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

- Steel S235JR according to NF EN 10025
- Hot-dip galvanized according to NF EN ISO 1461
- Total Height - 100mm
- Tubular Core - 48mm diameter
- Top plate - 100 x 100mm x 4mm
- Base plate - 130 x 130mm x 4mm
- Maximum post cross section - 200 x 200mm
- 11.0mm fixing holes (x8)

Brown plastic plugs, fix into concrete, brick and masonry by drilling a 7.0mm hole, suitable for use with woodscrews.

- Brown plugs are suitable for No.8 - No.12 (4.0mm - 6.0mm) screws
- Plug Length: 36mm
- Use a 7.0mm masonry drill bit