Fixings & Metalwork

Self drilling timber screws, made from high tensile steel for extreme strength. Perfect for many structural & landscaping projects. These Timberfast screws have a Hex Washer Head, which reduces the chance of "cam out", the moulded 12mm diameter washer ensures that materials are securely clamped together when the screw is tightened.

Popular uses include: building, fencing, decking (connecting framework) and joining sleepers

- Boxes of 50 screws, ¼" Hex Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant black Ruspert® coating - details in download tab below

Traditional round wire nails for fixing timber to timber. Large head for increased holding power.

Nail Length: 100mm
Nail gauge: 4.5mm
Average nail count = 77 /kg
Finish: Galvanised, service class 3 according to EN 10016-2
Manufactured to BS EN 10230-1

Traditional round wire nails for fixing timber to timber. Large head for increased holding power.
This product is not stocked. Typical availability is 1 - 2 working days from order.

Nail Length: 100mm
Nail gauge: 4.5mm
Average nail count = 77 /kg
Finish: Galvanised, service class 3 according to EN 10016-2
Manufactured to BS EN 10230-1

Self drilling timber screws, made from high tensile steel for extreme strength. Perfect for many structural & landscaping projects. These Timberfast screws have a Flush Washer Head with a T30 Torx Drive, which reduces the chance of "cam out", the flush 16mm diameter washer head ensures that materials are securely clamped together when the screw is tightened, leaving a smart, flush appearance.

Popular uses include: building, fencing, decking (connecting framework) and joining sleepers

- Boxes of 50 screws, ¼" T30 Torx Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant Green Ruspert® coating - details in download tab below

Metal corner plate for strengthening corners. Pre-drilled fixing holes for use with countersunk screws.
Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.0mm
Width: 16mm
Length: 100mm x 100mm
Fixing Holes: 6.0mm (x6)

Metal brace for strengthening corners. Can be used for internal or external corners.
Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole.
Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.0mm
Width: 24mm
Length: 100mm x 100mm
Drill Holes: 6.0mm (x6)

For vertical and horizontal restraint when connecting timber floor and roof systems to masonry walls.

Pre-galvanised twisted restraint straps, designed to building regulations for vertical restraint.

Strap thickness: 2mm
Strap width: 28mm
Strap total length: 1000mm
Distance from top of strap to top of twist: 100mm
6mm holes along the length of the strap

For vertical and horizontal restraint when connecting timber floor and roof systems to masonry walls.

The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of floor joists and the bottom chords of trusses without the need for notching.

Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.

A cold applied oxidised bitumen based adhesive.
Used to bond roofing felt to most surfaces, sealing felt laps and as a cold gritting solution for bonding mineral chippings

Approx. coverage: 1.4m² / litre