Fixings & Metalwork

Traditional round wire nails for fixing timber to timber. Large head for increased holding power.

Nail Length: 150mm
Nail gauge: 6.0mm
Average nail count = 29 /kg
Finish: Galvanised, service class 3 according to EN 10016-2
Manufactured to BS EN 10230-1

Traditional round wire nails for fixing timber to timber. Large head for increased holding power.

Nail Length: 150mm
Nail gauge: 6.0mm
Average nail count = 29 /kg
Finish: Galvanised, service class 3 according to EN 10016-2
Manufactured to BS EN 10230-1

Self drilling timber screws, made from high tensile steel for extreme strength. Perfect for many structural & landscaping projects. These Timberfast screws have a Flush Washer Head with a T30 Torx Drive, which reduces the chance of "cam out", the flush 16mm diameter washer head ensures that materials are securely clamped together when the screw is tightened, leaving a smart, flush appearance.

Popular uses include: building, fencing, decking (connecting framework) and joining sleepers

- Boxes of 50 screws, ¼" T30 Torx Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant Green Ruspert® coating - details in download tab below

Folded eye bolt, used for straining and tightening wires.

- Length: 150mm (to centre of eye)
- ⅜" Imperial thread (approx. 9mm thick)
- Internal eye diameter 15mm
- Includes 2 nuts & 2 Washers
- Bright Zinc Plated finish

Metal brace for strengthening corners. Can be used for internal or external corners.
Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole.
Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.5mm
Width: 24mm
Length: 150mm x 150mm
Drill Holes: 7.0mm (x6)

The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of floor joists and the bottom chords of trusses without the need for notching.

Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.

Short galvanised nails with an extra large clout head, designed for fixing down shed felt.
Approximately 345 nails per 500g pack.

Self drilling timber screws, made from high tensile steel for extreme strength. Perfect for many structural & landscaping projects. These Timberfast screws have a Hex Washer Head, which reduces the chance of "cam out", the moulded 12mm diameter washer ensures that materials are securely clamped together when the screw is tightened.

Popular uses include: building, fencing, decking (connecting framework) and joining sleepers

- Boxes of 50 screws, ¼" Hex Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant black Ruspert® coating - details in download tab below

Traditional round wire nails for fixing timber to timber. Large head for increased holding power.

Nail Length: 125mm
Nail gauge: 5.6mm
Average nail count = 42 /kg
Finish: Galvanised, service class 3 according to EN 10016-2
Manufactured to BS EN 10230-1

Self drilling timber screws, made from high tensile steel for extreme strength. Perfect for many structural & landscaping projects. These Timberfast screws have a Flush Washer Head with a T30 Torx Drive, which reduces the chance of "cam out", the flush 16mm diameter washer head ensures that materials are securely clamped together when the screw is tightened, leaving a smart, flush appearance.

Popular uses include: building, fencing, decking (connecting framework) and joining sleepers

- Boxes of 50 screws, ¼" T30 Torx Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant Green Ruspert® coating - details in download tab below

The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of floor joists and the bottom chords of trusses without the need for notching.

Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.

A post support fitting for installing timber posts and timber framework. The timber sits on the Post Support out of ground contact, which prevents rotting due to moisture from the ground. The height/level of the square support plate can easily be adjusted which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

Installation: drill a 22mm diameter hole in the end of the timber post for the threaded bar to fit into, the depth of hole will vary depending on how much elevation is required. The post should sit firmly over the threaded bar down to the square support plate. The two nuts are tightened against each other to lock the support plate in the required position. The bottom of the post support is designed to be bolted down to a concrete base, we recommend using M10 Thunder Bolts.

- Welded construction, galvanised steel
- Total Height - 255mm
- Threaded bar - 22mm diameter
- Square support plate - 100 x 100mm x 4.5mm
- Bolt Down Plate - 100 x 100mm x 4.5mm
- 11mm fixing holes (x8)

100mm Vine Eye with screw end, used for straining wire for climbing plants.

- Length: 100mm
- Thickness: 4.0mm
- Internal eye diameter: 11mm
- Mild Steel
- Bright Zinc Plated (BZP)
- Folded Eye (Unwelded)

33.3% discount for box quantities

Steel T-plate suitable for a range of timber frame building uses. Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.0mm
Overall Width: 100mm x 19mm
Overall Length: 100mm x 19mm
Fixing Holes: 6.0mm (x5)

A mild steel plate with fixing holes used for strengthening and repairs.
Pre-drilled fixing holes for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.0mm
Width: 19mm
Length: 100mm
Fixing Holes: 5.0mm (x4)