Fixings & Metalwork

Self drilling timber screws, made from high tensile steel for extreme strength. Perfect for many structural & landscaping projects. These Timberfast screws have a Hex Washer Head, which reduces the chance of "cam out", the moulded 12mm diameter washer ensures that materials are securely clamped together when the screw is tightened.

Popular uses include: building, fencing, decking (connecting framework) and joining sleepers

- Boxes of 50 screws, ¼" Hex Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant black Ruspert® coating - details in download tab below

A mild steel plate with fixing holes used for strengthening and repairs.
Pre-drilled fixing holes for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.0mm
Width: 19mm
Length: 100mm
Fixing Holes: 5.0mm (x4)

Steel T-plate suitable for a range of timber frame building uses. Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.0mm
Overall Width: 100mm x 19mm
Overall Length: 100mm x 19mm
Fixing Holes: 6.0mm (x5)

100mm Vine Eye with screw end, used for straining wire for climbing plants.

- Length: 100mm
- Thickness: 4.0mm
- Internal eye diameter: 11mm
- Mild Steel
- Bright Zinc Plated (BZP)
- Folded Eye (Unwelded)

33.3% discount for box quantities

A post support fitting for installing timber posts and timber framework. The timber sits on the Post Support out of ground contact, which prevents rotting due to moisture from the ground. The height/level of the square support plate can easily be adjusted which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

Installation: drill a 22mm diameter hole in the end of the timber post for the threaded bar to fit into, the depth of hole will vary depending on how much elevation is required. The post should sit firmly over the threaded bar down to the square support plate. The two nuts are tightened against each other to lock the support plate in the required position. The bottom of the post support is designed to be bolted down to a concrete base, we recommend using M10 Thunder Bolts.

- Welded construction, galvanised steel
- Total Height - 255mm
- Threaded bar - 22mm diameter
- Square support plate - 100 x 100mm x 4.5mm
- Bolt Down Plate - 100 x 100mm x 4.5mm
- 11mm fixing holes (x8)