Fixings & Metalwork

A cold applied oxidised bitumen based adhesive.
Used to bond roofing felt to most surfaces, sealing felt laps and as a cold gritting solution for bonding mineral chippings

Approx. coverage: 1.4m² / litre (3.5m² / tin)

Self drilling timber screws, made from high tensile steel for extreme strength. Perfect for many structural & landscaping projects. These Timberfast screws have a Hex Washer Head, which reduces the chance of "cam out", the moulded 12mm diameter washer ensures that materials are securely clamped together when the screw is tightened.

Popular uses include: building, fencing, decking (connecting framework) and joining sleepers

- Boxes of 50 screws, ¼" Hex Driving Bit included (fits a standard drill / impact driver)
- Screws and bit drivers can be purchased individually when bought in store or ordered by phone
- Zinc plated with an additional corrosion resistant black Ruspert® coating - details in download tab below

High performance Torx-drive wood screws, made in Germany. The Wirox coating gives a high level of protection against corrosion and is more environmentally friendly than conventional finishes as it is free from chromium-VI. The 4CUT point eliminates the need to pre-drill and reduces splitting during insertion.

- Box of 100 screws
- Suitable for internal & external use
- TX20 Torx screwdriver drive, bits sold separately

A post support fitting for installing timber posts. The post sits on the socket out of ground contact, which prevents the timber from rotting due to moisture from the ground. It is suitable for structurally supported timber posts that need to last a long time e.g. for a basic timber porch or lean-to. Not recommended for free standing posts e.g. fence posts.

Installation: drill an 18mm diameter hole in the end of the timber post for the Ground Socket to fit into, the hole needs to be at least 155mm deep for the post to sit firmly over the metal dowel down to the square support plate. The bottom of the ground socket is designed to be concreted into the ground, the cross bar ensures a secure fixing within the concrete.

- Welded construction, galvanised steel
- Total length - 600mm
- Fixing Dowel - 18mm diameter x 150mm
- Square support plate 100 x 100mm x 10mm
- Concrete-in section below support plate - 18mm diameter x 450mm
- Concrete-in 'cross bar' - 9mm diameter x 110mm across full width

A post support fitting for installing timber posts and timber framework. The timber sits on the Post Support out of ground contact, which prevents rotting due to moisture from the ground. The height/level of the square support plate can easily be adjusted which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

Installation: drill a 22mm diameter hole in the end of the timber post for the threaded bar to fit into, the depth of hole will vary depending on how much elevation is required. The post should sit firmly over the threaded bar down to the square support plate. The two nuts are tightened against each other to lock the support plate in the required position. The bottom of the post support is designed to be bolted down to a concrete base, we recommend using M10 Thunder Bolts.

- Welded construction, galvanised steel
- Total Height - 255mm
- Threaded bar - 22mm diameter
- Square support plate - 100 x 100mm x 4.5mm
- Bolt Down Plate - 100 x 100mm x 4.5mm
- 11mm fixing holes (x8)