Search
Fixings & Metalwork
Shop essential fixings and metalwork in Bristol for timber, decking and fencing projects.
Our range includes nails, screws, brackets, joist hangers, bolts and structural fixings, all selected for strength, reliability and long-lasting performance.
Available from our Bristol yard with fast delivery across Bath and surrounding areas, you can also complete your project with our decking and landscaping supplies, fencing materials, and timber treatments – all from one trusted supplier.
M6 x 60mm Hammer Fixing
A light duty fixing for jobs where speed of installation is important.
Hammer fixings work in a similar way to screws and plugs, the hammer fixing screw has a special thread that can be hammered into the plug and loosened / screwed out if required.
Installation:
Pre-drill a 6mm pilot hole through the item that you're fixing and into the masonry or brickwork. Lightly tap the fixing through the pilot hole with a hammer until the plug is flush. EG. if you're fixing a timber wall plate, the plug fits inside the timber as well as the wall. Once the plug is flush with the timber, hit the head of the screw harder to drive it into the plastic sleeve until tight.
Minimum fixing depth: 45mm
Hammer fixings work in a similar way to screws and plugs, the hammer fixing screw has a special thread that can be hammered into the plug and loosened / screwed out if required.
Installation:
Pre-drill a 6mm pilot hole through the item that you're fixing and into the masonry or brickwork. Lightly tap the fixing through the pilot hole with a hammer until the plug is flush. EG. if you're fixing a timber wall plate, the plug fits inside the timber as well as the wall. Once the plug is flush with the timber, hit the head of the screw harder to drive it into the plastic sleeve until tight.
Minimum fixing depth: 45mm
Stock Availability:
228 in stock
From £0.12 Inc. VAT
M6 x 80mm Hammer Fixing
A light duty fixing for jobs where speed of installation is important.
Hammer fixings work in a similar way to screws and plugs, the hammer fixing screw has a special thread that can be hammered into the plug and loosened / screwed out if required.
Installation:
Pre-drill a 6mm pilot hole through the item that you're fixing and into the masonry or brickwork. Lightly tap the fixing through the pilot hole with a hammer until the plug is flush. EG. if you're fixing a timber wall plate, the plug fits inside the timber as well as the wall. Once the plug is flush with the timber, hit the head of the screw harder to drive it into the plastic sleeve until tight.
Minimum fixing depth: 45mm
Hammer fixings work in a similar way to screws and plugs, the hammer fixing screw has a special thread that can be hammered into the plug and loosened / screwed out if required.
Installation:
Pre-drill a 6mm pilot hole through the item that you're fixing and into the masonry or brickwork. Lightly tap the fixing through the pilot hole with a hammer until the plug is flush. EG. if you're fixing a timber wall plate, the plug fits inside the timber as well as the wall. Once the plug is flush with the timber, hit the head of the screw harder to drive it into the plastic sleeve until tight.
Minimum fixing depth: 45mm
Stock Availability:
58 in stock
From £0.18 Inc. VAT
M8 x 100mm Hammer Fixing
A light duty fixing for jobs where speed of installation is important.
Hammer fixings work in a similar way to screws and plugs, the hammer fixing screw has a special thread that can be hammered into the plug and loosened / screwed out if required.
Installation:
Pre-drill a 8mm pilot hole through the item that you're fixing and into the masonry or brickwork. Lightly tap the fixing through the pilot hole with a hammer until the plug is flush. EG. if you're fixing a timber wall plate, the plug fits inside the timber as well as the wall. Once the plug is flush with the timber, hit the head of the screw harder to drive it into the plastic sleeve until tight.
Minimum fixing depth: 45mm
Hammer fixings work in a similar way to screws and plugs, the hammer fixing screw has a special thread that can be hammered into the plug and loosened / screwed out if required.
Installation:
Pre-drill a 8mm pilot hole through the item that you're fixing and into the masonry or brickwork. Lightly tap the fixing through the pilot hole with a hammer until the plug is flush. EG. if you're fixing a timber wall plate, the plug fits inside the timber as well as the wall. Once the plug is flush with the timber, hit the head of the screw harder to drive it into the plastic sleeve until tight.
Minimum fixing depth: 45mm
Stock Availability:
234 in stock
From £0.24 Inc. VAT
M10 x 100mm Hammer Fixing
A light duty fixing for jobs where speed of installation is important.
Hammer fixings work in a similar way to screws and plugs, the hammer fixing screw has a special thread that can be hammered into the plug and loosened / screwed out if required.
Installation:
Pre-drill a 10mm pilot hole through the item that you're fixing and into the masonry or brickwork. Lightly tap the fixing through the pilot hole with a hammer until the plug is flush. EG. if you're fixing a timber wall plate, the plug fits inside the timber as well as the wall. Once the plug is flush with the timber, hit the head of the screw harder to drive it into the plastic sleeve until tight.
Minimum fixing depth: 45mm
Hammer fixings work in a similar way to screws and plugs, the hammer fixing screw has a special thread that can be hammered into the plug and loosened / screwed out if required.
Installation:
Pre-drill a 10mm pilot hole through the item that you're fixing and into the masonry or brickwork. Lightly tap the fixing through the pilot hole with a hammer until the plug is flush. EG. if you're fixing a timber wall plate, the plug fits inside the timber as well as the wall. Once the plug is flush with the timber, hit the head of the screw harder to drive it into the plastic sleeve until tight.
Minimum fixing depth: 45mm
Stock Availability:
196 in stock
From £0.36 Inc. VAT
M10 x 160mm Hammer Fixing
A light duty fixing for jobs where speed of installation is important.
Hammer fixings work in a similar way to screws and plugs, the hammer fixing screw has a special thread that can be hammered into the plug and loosened / screwed out if required.
Installation:
Pre-drill a 10mm pilot hole through the item that you're fixing and into the masonry or brickwork. Lightly tap the fixing through the pilot hole with a hammer until the plug is flush. EG. if you're fixing a timber wall plate, the plug fits inside the timber as well as the wall. Once the plug is flush with the timber, hit the head of the screw harder to drive it into the plastic sleeve until tight.
Minimum fixing depth: 45mm
Hammer fixings work in a similar way to screws and plugs, the hammer fixing screw has a special thread that can be hammered into the plug and loosened / screwed out if required.
Installation:
Pre-drill a 10mm pilot hole through the item that you're fixing and into the masonry or brickwork. Lightly tap the fixing through the pilot hole with a hammer until the plug is flush. EG. if you're fixing a timber wall plate, the plug fits inside the timber as well as the wall. Once the plug is flush with the timber, hit the head of the screw harder to drive it into the plastic sleeve until tight.
Minimum fixing depth: 45mm
Stock Availability:
163 in stock
From £0.72 Inc. VAT
Red Wall Plugs - Box of 100
Red plastic plugs, fix into concrete, brick and masonry by drilling a 5.5mm hole, suitable for use with woodscrews.
- Red wall plugs are suitable for No.6 - No.10 (3.5mm - 5.0mm) screws.
- Plug Length: 30mm
- Use a 5.5mm masonry drill bit
- Red wall plugs are suitable for No.6 - No.10 (3.5mm - 5.0mm) screws.
- Plug Length: 30mm
- Use a 5.5mm masonry drill bit
Stock Availability:
6 in stock
£0.96 Inc. VAT
Brown Wall Plugs - Box of 100
Brown plastic plugs, fix into concrete, brick and masonry by drilling a 7.0mm hole, suitable for use with woodscrews.
- Brown plugs are suitable for No.8 - No.12 (4.0mm - 6.0mm) screws
- Plug Length: 36mm
- Use a 7.0mm masonry drill bit
- Brown plugs are suitable for No.8 - No.12 (4.0mm - 6.0mm) screws
- Plug Length: 36mm
- Use a 7.0mm masonry drill bit
Stock Availability:
5 in stock
£1.13 Inc. VAT
M6 x 65mm Carriage Bolt
Carriage Bolt; cup square hex, 16mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
87 in stock
From £0.14 Inc. VAT
M8 x 50mm Carriage Bolt
Carriage Bolt; cup square hex, 20mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
78 in stock
From £0.17 Inc. VAT
M8 x 75mm Carriage Bolt
Carriage Bolt; cup square hex, 20mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
110 in stock
From £0.22 Inc. VAT
M8 x 100mm Carriage Bolt
Carriage Bolt; cup square hex, 20mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
138 in stock
From £0.27 Inc. VAT
M8 x 130mm Carriage Bolt
Carriage Bolt; cup square hex, 20mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
132 in stock
From £0.34 Inc. VAT
M8 x 150mm Carriage Bolt
Carriage Bolt; cup square hex, 20mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
108 in stock
From £0.37 Inc. VAT
M8 x 180mm Carriage Bolt
Carriage Bolt; cup square hex, 20mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
242 in stock
From £0.61 Inc. VAT
M8 x 200mm Carriage Bolt
Carriage Bolt; cup square hex, 20mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
178 in stock
From £0.66 Inc. VAT
M10 x 75mm Carriage Bolt
Carriage Bolt; cup square hex, 23mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
68 in stock
From £0.36 Inc. VAT
M10 x 100mm Carriage Bolt
Carriage Bolt; cup square hex, 23mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
133 in stock
From £0.43 Inc. VAT
M10 x 130mm Carriage Bolt
Carriage Bolt; cup square hex, 23mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
2513 in stock
From £0.51 Inc. VAT
M10 x 150mm Carriage Bolt
Carriage Bolt; cup square hex, 23mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
148 in stock
From £0.58 Inc. VAT
M10 x 180mm Carriage Bolt
Carriage Bolt; cup square hex, 23mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
179 in stock
From £0.74 Inc. VAT
M10 x 200mm Carriage Bolt
Carriage Bolt; cup square hex, 23mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
187 in stock
From £0.86 Inc. VAT
M10 x 230mm Carriage Bolt
Carriage Bolt; cup square hex, 23mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
96 in stock
From £1.10 Inc. VAT
M10 x 300mm Carriage Bolt
Carriage Bolt; cup square hex, 23mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
41 in stock
From £1.38 Inc. VAT
M12 x 50mm Carriage Bolt
Carriage Bolt; cup square hex, 30mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
51 in stock
From £0.58 Inc. VAT
M12 x 100mm Carriage Bolt
Carriage Bolt; cup square hex, 30mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.
Supplied with one standard hex nut, washers sold separately.
Stock Availability:
93 in stock
From £0.71 Inc. VAT
Call us Monday - Friday 8am - 5pm. Saturday 8am - 12pm.
Payment options
