Fencing Materials

Round timber pole; suitable for agricultural use and in domestic gardens for building garden structures, garden furniture, raised beds, and retaining walls etc. This size of pole is also popular for outdoor activities including obstacle courses, bridge building etc. Machine round poles are regularised to ensure a uniform size. Pressure treated to UC4 standard. These poles are chamfered both ends.

These round poles are prone to shakes (splits) and not suitable for use in commercial play equipment.

- 150mm Diameter x 3.6m
- Pole; chamfered both ends
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

2.7m slotted concrete corner post; fully slotted on two adjacent sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 123mm x 130mm x 2400mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 66kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

Diamond Trellis panels are constructed using good quality planed battens, they are framed all round with rebated framing. This attractive trellis panel obscures visibilty between boundaries without the need of a solid fence or the need to block out daylight. This product is pressure treated green.

- Width: 1829mm ( 6' )
- Height: 1200mm
- Hole Size: (approx.) 50 x 50mm.
- Frame Thickness: 30mm
- Pressure Treated

Heavy Diamond Trellis panels are constructed using good quality planed battens, they are framed all round with rebated framing. This attractive trellis panel obscures visibilty between boundaries without the need of a solid fence or the need to block out daylight. This product is pressure treated green.

- Width: 1800mm
- Height: 1200mm
- Hole Size: (approx.) 100 x 100mm.
- Frame Thickness: 45mm
- Pressure Treated

Heavy duty concrete fence post for feather-edge fencing. This post has a back-weathered top, 3 recesses with bolt holes for fencing rails and bolt holes at the bottom to fit a gravel board. View image 2 for post dimensions. This post is designed to suit 1.65m feather edge boarding with a 150mm gravel board.

- Post Length: 2485mm
- Suitable for 1.65m Feather Edge + 150mm Gravel Board
- Three Recesses for 47 x 75mm Rail
- Use M8 x 180mm bolts to attach rails & gravel boards
- 73kg Each

The Milano fence panel is a good quality, well-made, decorative fence panel. It looks the same from both sides; perfect for shared boundaries. These panels are constructed with ‘hit & miss’ slats that allow wind to pass through. This panel has a smooth machined finish and is pressure treated green.

Height: 1200mm (approx. 4')
Width: 1800mm
Depth: 45mm

Please note: This panel is 1800mm wide, not 1829mm (6’), you can increase the panel width to 1829mm by attaching panel packing strips, sold separately.

2.4m slotted concrete Corner post; fully slotted on two adjacent sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 123mm x 130mm x 2400mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 66kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

Round timber pole; suitable for agricultural use and in domestic gardens for building garden structures, garden furniture, raised beds, and retaining walls etc. This size of pole is also popular for outdoor activities including obstacle courses, bridge building etc. Machine round poles are regularised to ensure a uniform size. Pressure treated to UC4 standard. These poles are chamfered both ends.

These round poles are prone to shakes (splits) and not suitable for use in commercial play equipment.

- 150mm Diameter x 3.0m
- Pole; chamfered both ends
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

Manufactured using heavily galvanised high tensile wire, it has 4 long sharp points spaced 100mm apart. Supplied on strong wooden spools with carrying handles for safety and ease of handling.

- 1.6mm Line Wires: 1050-1200 N/mm²
-​ 1.45mm Barbing Wires: 415-550 N/mm²
- Roll Weight: 10.5kg

Chain link fencing is wire mesh, woven into a diamond pattern. A popular style of fencing for sports grounds and for security purposes. It can be installed using timber posts or with metal posts which are specifically designed to suit chain link. Supplied in tightly wound rolls.

• Finish: Green P.V.C Coating
• Height: 900mm
• Roll Length: 12.5m
• Mesh Size: 50 x 50mm
• Wire Gauge: 1.70/2.50mm (Inner wire= 1.7mm, overall thickness inc. green coating= 2.5mm)
• Green chain link has a galvanised wire core to ensure longevity
• 26m of 2.24/3.15mm line wire included with each roll
• Manufactured to BS EN 10223-6 1998
• Stretcher Bars, angle cleats etc. sold separately

Heavy Diamond Trellis panels are constructed using good quality planed battens, they are framed all round with rebated framing. This attractive trellis panel obscures visibilty between boundaries without the need of a solid fence or the need to block out daylight. This product is pressure treated green.

- Width: 1800mm
- Height: 900mm
- Hole Size: (approx.) 100 x 100mm.
- Frame Thickness: 45mm
- Pressure Treated

Heavy duty concrete fence post for feather-edge fencing. This post has a weathered top; 3 recesses with bolt holes for fencing rails and bolt holes at the bottom to fit a gravel board. View image 2 for dimensions. This post is suitable for 1.35m feather edge boarding with a 150mm gravel board.

- Post Length: 2205mm
- Suitable for 1.35m Feather Edge + 150mm Gravel Board
- Three Recesses for 47 x 75mm Rail
- Use M8 x 180mm bolts to attach rails & gravel boards
- 67kg Each

A heavy duty Close Board fence panel. Made in the U.K. using pressure treated, home grown softwoood.

Height: 1829mm (6')
Width: 1829mm (6’)

- 47 x 30mm framework
- ex. 22 x 125mm feather edge
- Nailed construction
- Pressure Treated green
- Finished with planed capping

These concrete gravel boards are designed to be used with recessed concrete posts. Concrete gravel boards for recessed posts give feather edge fencing a level surface to sit on. Raising feather edge boards on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers.

- Dimensions: 50mm x 150mm x 3000mm
- 52kg Each
- C50 Concrete (a strong mix)
- Two 5.5mm rebar set inside
- One 14mm diameter hole in the middle to attached a support post (if required)

A heavy duty Close Board fence panel. Made in the U.K. using pressure treated, home grown softwoood.

Height: 1676mm (5'6")
Width: 1829mm (6’)

- 47 x 30mm framework
- ex. 22 x 125mm feather edge
- Nailed construction
- Pressure Treated green
- Finished with planed capping

Diamond Trellis panels are constructed using good quality planed battens, they are framed all round with rebated framing. This attractive trellis panel obscures visibilty between boundaries without the need of a solid fence or the need to block out daylight. This product is pressure treated green.

- Width: 1829mm ( 6' )
- Height: 900mm
- Hole Size: (approx.) 50 x 50mm.
- Frame Thickness: 30mm
- Pressure Treated

A premium quality Overlap Panel which is built to last.

Height: 1829mm (6')
Width: 1829mm (6')

- Fully pressure treated panels
- Nailed construction
- Straight-edge, horizontal, sawn-finish slats
- Five vertical battens on both sides (approx. 16 x 38mm)
- Framed top and bottom on both sides (approx. 16 x 38mm)
- Finished and protected with a top capping strip
- These panels look the same from both sides, perfect for shared boundaries
- Manufactured in the U.K.

A premium quality Overlap Panel which is built to last.

Height: 1676mm (5'6")
Width: 1829mm (6')

- Fully pressure treated panels
- Nailed construction
- Straight-edge, horizontal, sawn-finish slats
- Five vertical battens on both sides (approx. 16 x 38mm)
- Framed top and bottom on both sides (approx. 16 x 38mm)
- Finished and protected with a top capping strip
- These panels look the same from both sides, perfect for shared boundaries
- Manufactured in the U.K.

A heavy duty Close Board fence panel. Made in the U.K. using pressure treated, home grown softwoood.

Height: 1524mm (5')
Width: 1829mm (6’)

- 47 x 30mm framework
- ex. 22 x 125mm feather edge
- Nailed construction
- Pressure Treated green
- Finished with planed capping

Slotted Concrete End Post; fully slotted on one side for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2700mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 56kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

A general purpose straining wire, mainly used for fencing purposes. Can be shaped by hand and cut with heavy duty wire cutters.

- 3.15mm Overall Thickness (including galvanised coating)
- 10kg Roll (approx. 164 meters)
- Galvanised Finish
- Manufactured to BS 4102
- Galvanised to BS EN 10244-2

A general purpose straining wire, mainly used for fencing purposes. Can be shaped by hand and cut with wire cutters.

- 2.5mm Overall Thickness (including galvanised coating)
- 10kg Roll (approx. 260 meters)
- Galvanised Finish
- Manufactured to BS 4102
- Galvanised to BS EN 10244-2

Square Trellis Panels are sturdy and built to last; made from sawn finish 19 x 38mm batten; nailed construction. Pressure treated Green.

- Width: 1829mm ( 6’ )
- Height: 1829mm ( 6’ )
- Hole Size: 110 x 110mm (approx.)
- 19 x 38mm Sawn Batten
- Nailed Construction
- Pressure Treated Green

Welded wire mesh is produced using wire that is welded on every joint, this makes the product very strong while remaining flexible enough to shape. Galvanised for outdoor use, ideal for use in animal cages & runs etc.

Height: 900mm
Length: 6m
Mesh size: 13mm x 25mm
Wire gauge: 1.0mm
Galvanised
Manufactured to BS EN 10223-4 1998

These concrete gravel boards are designed to be used with recessed concrete posts. Concrete gravel boards for recessed posts give feather edge fencing a level surface to sit on. Raising feather edge boards on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers.

- Dimensions: 50mm x 150mm x 2400mm
- 40kg Each
- C50 Concrete (a strong mix)
- Two 5.5mm rebar set inside
- One 14mm diameter hole in the middle to attach a support post (if required)