Simpson Strong-Tie NP15/80/140 nail plates can be used in various applications, in particular for jointing or the connection of wood elements in the same plane.
A quality Post Base made by Simpson Strong-Tie. Used to raise timber posts and timber framework above ground level, which prevents rotting caused by moisture from ground contact. The height/level of the square support plate can easily be adjusted after installation which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.
- Dichromate coated galvanised mild steel - Height Adjustable: 100mm→150mm - Threaded Core: 20mm diameter - Top plate: 100 x 100mm x 5mm - Base plate: 130 x 130mm x 5mm - 12mm fixing holes
A quality Post Base made by Simpson Strong-Tie. Used to raise timber posts and timber framework above ground level, which prevents rotting caused by moisture from ground contact. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.
- Steel S235JR according to NF EN 10025 - Hot-dip galvanized according to NF EN ISO 1461 - Total Height - 100mm - Tubular Core - 48mm diameter - Top plate - 100 x 100mm x 4mm - Base plate - 130 x 130mm x 4mm - Maximum post cross section - 200 x 200mm - 11.0mm fixing holes (x8)
The Simpson Stong-Tie A34 Framing Anchor is a versatile bracket for many timber framing needs. The speed prong allows you to quickly hold the anchor in place while you get the rest of the fixings in. Galvanised for corrosion resistance.
The Simpson Strong-Tie A35 anchor’s exclusive bending slot allows instant, accurate bending on site for all two and three-way ties. This framing anchor has a speed prong allowing you to quickly hold the anchors in place while you get the rest of the fixings in.
Thickness: 1.0mm Width: 36mm x 37mm Length: 113mm Slot in Corner: 41mm Fixing Holes: 3.5mm (x12)
A post support fitting for installing timber posts. The post sits on the socket out of ground contact, which prevents the timber from rotting due to moisture from the ground. It is suitable for structurally supported timber posts that need to last a long time e.g. for a basic timber porch or lean-to. Not recommended for free standing posts e.g. fence posts.
Installation: drill an 18mm diameter hole in the end of the timber post for the Ground Socket to fit into, the hole needs to be at least 155mm deep for the post to sit firmly over the metal dowel down to the square support plate. The bottom of the ground socket is designed to be concreted into the ground, the cross bar ensures a secure fixing within the concrete.
- Welded construction, galvanised steel - Total length - 600mm - Fixing Dowel - 18mm diameter x 150mm - Square support plate 100 x 100mm x 10mm - Concrete-in section below support plate - 18mm diameter x 450mm - Concrete-in 'cross bar' - 9mm diameter x 110mm across full width
Cost effective damp proof course for domestic construction Suitable for use in horizontal and vertical applications Safe and clean to handle and flexible even at low temperatures
Metal brace for strengthening corners. Can be used for internal or external corners. Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole. Bright Zinc Plated (BZP) for corrosion resistance.
Metal brace for strengthening corners. Can be used for internal or external corners. Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole. Bright Zinc Plated (BZP) for corrosion resistance.
Metal brace for strengthening corners. Can be used for internal or external corners. Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole. Bright Zinc Plated (BZP) for corrosion resistance.
Metal brace for strengthening corners. Can be used for internal or external corners. Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole. Bright Zinc Plated (BZP) for corrosion resistance.
The Simpson Strong-Tie EFIXR553, is a light Reinforced Angle Bracket (reinforced in corner). A light, sturdy, versatile metal bracket for a wide range of applications. Galvanised for corrosion resistance.
Thickness: 2.0mm Width: 30mm Length: 50mm x 54mm Fixing Holes: 5.0mm (x8), Obround Slot: 6.5mm x 30mm (on 50mm flange) Obround Slot: 8.5mm x 30mm ( on 54mm flange)
The Simpson Strong-Tie EA554, is a light yet sturdy Reinforced Angle Bracket (reinforced in corner). A metal bracket for strengthening corners and connecting a wide range items. Galvanised for corrosion resistance.
The Simpson Strong-Tie ABR90 (previously E2/2.5/7090) is a heavy-duty reinforced angle bracket (reinforced in corner) for many applications. Galvanised for corrosion resistance.