Pre-galvanised twisted restraint straps, designed to building regulations for vertical restraint.
Strap thickness: 2mm Strap width: 28mm Strap total length: 1000mm Distance from top of strap to top of twist: 100mm 6mm holes along the length of the strap
A mild steel plate with fixing holes used for strengthening and repairs. Pre-drilled fixing holes for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance.
A post support fitting for installing timber posts and timber framework. The timber sits on the Post Support out of ground contact, which prevents rotting due to moisture from the ground. The height/level of the square support plate can easily be adjusted which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.
Installation: drill a 22mm diameter hole in the end of the timber post for the threaded bar to fit into, the depth of hole will vary depending on how much elevation is required. The post should sit firmly over the threaded bar down to the square support plate. The two nuts are tightened against each other to lock the support plate in the required position. The bottom of the post support is designed to be bolted down to a concrete base, we recommend using M10 Thunder Bolts.
- Welded construction, galvanised steel - Total Height - 255mm - Threaded bar - 22mm diameter - Square support plate - 100 x 100mm x 4.5mm - Bolt Down Plate - 100 x 100mm x 4.5mm - 11mm fixing holes (x8)
A mild steel plate with fixing holes used for strengthening and repairs. Pre-drilled for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance.
Simpson Strong-Tie NP15/80/140 nail plates can be used in various applications, in particular for jointing or the connection of wood elements in the same plane.
Nationwide delivery available on this product, contact us for details
The RR ridge rafter connector provides alignment control and correct nailing locations. The RR47 may be used with any rafter slope up to 30°. Galvanised for corrosion resistance.
For back-to-back installations, the minimum width of the ridge plate is 38mm. Secure in place using 3.75 x 30mm square twisted nails.
A mild steel plate with fixing holes used for strengthening and repairs. Pre-drilled for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance.
A post support fitting for installing timber posts and timber framework. The timber sits on the Post Support out of ground contact, which prevents rotting due to moisture from the ground. The height/level of the square support plate can easily be adjusted which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.
Installation: drill a 22mm diameter hole in the end of the timber post for the threaded bar to fit into, the depth of hole will vary depending on how much elevation is required. The post should sit firmly over the threaded bar down to the square support plate. The two nuts are tightened against each other to lock the support plate in the required position. The bottom of the post support is designed to be bolted down to a concrete base, we recommend using M10 Thunder Bolts.
- Welded construction, galvanised steel - Total Height - 255mm - Threaded bar - 22mm diameter - Square support plate - 80 x 80mm x 4.5mm - Bolt Down Plate - 80 x 80mm x 4.5mm - 11mm fixing holes (x8)