Posts & Postmix

Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts.

Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature).
Simply half fill the hole with water, then pour the post mix in.

Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size).

We offer 33% discount on post-mix when you pay & collect in store!

Postsaver Pro-Sleeves are a guaranteed, proven solution to ensure long-life fence posts.

The sleeve’s unique dual-layer, rot prevention technology excludes all the factors required for decay to occur at the ground-line. Unlike liquid coatings and bitumen paint, Postsaver Pro Sleeves maintain a barrier to the causes of decay even when the post cracks or splits.

Pro-Sleeves are proven to prevent ground rot with over 26 years of volume use in 30+ countries worldwide. Backed up with 20 years of excellent independent test data, they are easily heat applied with a blowtorch in a matter of seconds, and sleeved posts can be installed in all the usual ways.

Simply fit Postsaver Pro-Sleeves and relax, safe in the knowledge that your posts are protected from rot for 20 years.

Postsaver: Do it Once, Do It Right

Postsaver Pro-Sleeves are a guaranteed, proven solution to ensure long-life fence posts.

The sleeve’s unique dual-layer, rot prevention technology excludes all the factors required for decay to occur at the ground-line. Unlike liquid coatings and bitumen paint, Postsaver Pro Sleeves maintain a barrier to the causes of decay even when the post cracks or splits.

Pro-Sleeves are proven to prevent ground rot with over 26 years of volume use in 30+ countries worldwide. Backed up with 20 years of excellent independent test data, they are easily heat applied with a blowtorch in a matter of seconds, and sleeved posts can be installed in all the usual ways.

Simply fit Postsaver Pro-Sleeves and relax, safe in the knowledge that your posts are protected from rot for 20 years.

Postsaver: Do it Once, Do It Right

This Postsaver is suitable for use on the following post sizes:
• 175 x 175mm
• 200 x 200mm

• 200mm Round

Postsaver Pro-Sleeves are a guaranteed, proven solution to ensure long-life fence posts.

The sleeve’s unique dual-layer, rot prevention technology excludes all the factors required for decay to occur at the ground-line. Unlike liquid coatings and bitumen paint, Postsaver Pro Sleeves maintain a barrier to the causes of decay even when the post cracks or splits.

Pro-Sleeves are proven to prevent ground rot with over 26 years of volume use in 30+ countries worldwide. Backed up with 20 years of excellent independent test data, they are easily heat applied with a blowtorch in a matter of seconds, and sleeved posts can be installed in all the usual ways.

Simply fit Postsaver Pro-Sleeves and relax, safe in the knowledge that your posts are protected from rot for 20 years.

Postsaver: Do it Once, Do It Right

This Postsaver is suitable for use on the following post sizes:
• 75 x 150mm
• 100 x 125mm
• 125 x 125mm
• 150 x 150mm

• 150mm Round

Postsaver Pro-Sleeves are a guaranteed, proven solution to ensure long-life fence posts.

The sleeve’s unique dual-layer, rot prevention technology excludes all the factors required for decay to occur at the ground-line. Unlike liquid coatings and bitumen paint, Postsaver Pro Sleeves maintain a barrier to the causes of decay even when the post cracks or splits.

Pro-Sleeves are proven to prevent ground rot with over 26 years of volume use in 30+ countries worldwide. Backed up with 20 years of excellent independent test data, they are easily heat applied with a blowtorch in a matter of seconds, and sleeved posts can be installed in all the usual ways.

Simply fit Postsaver Pro-Sleeves and relax, safe in the knowledge that your posts are protected from rot for 20 years.

Postsaver: Do it Once, Do It Right

This Postsaver is suitable for use on the following post sizes:
• 75 x 75mm
• 75 x 100mm
• 75 x 125mm
• 100 x 100mm

• 75mm Round
• 85mm Round
• 100mm Round

This Metal Gate 'Slam Post' is designed to suit our range of metal field gates. This post has a machined slot to suit the spring-loaded animal bolt included with our metal field gates.

90mm diameter posts are suitable for galvanised gates up to (and including) 6' wide, gates wider than 6' should be hung using 115mm diameter posts.

This Metal Gate 'Slam Post' is designed to suit our range of metal field gates. This post has a machined slot to suit the spring-loaded animal bolt included with our metal field gates.

115mm diameter posts are suitable for our metal field gates 7' wide and above.

A galvanised steel 'Hanging Post' designed to fit our range of metal field gates. This post has built in 20mm gate hooks that the 22mm eye-bolt hinge fittings included with our metal field gates.

90mm diameter posts are suitable for metal field gates up to (and including) 6' wide, gates wider than 6' should be hung using 115mm diameter posts.

A galvanised steel 'Hanging Post' designed to fit our range of metal field gates. This post has built in 20mm gate hooks that fit the 22mm eye-bolt hinge fittings included with our metal field gates.

115mm diameter posts are suitable for metal field gates wider than 6'.

Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts.

Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature).
Simply half fill the hole with water, then pour the post mix in.

Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size).

We offer 33% discount on post-mix when you pay & collect in store!

Machined from a single piece of 100 x 100mm timber. These timber "H" posts are slotted to fit a standard fence panel.

- Machined from 100 x 100mm, finished size approx. 95 x 95mm
- Slots on 2 sides, 50mm wide x 20mm deep.
- Good quality slow-grown softwood
- Planed finish, with 4 rounded corners
- Pressure treated green, UC4 treatment class

A concrete post for building raised decking; a heavy duty, durable alternative to timber posts. Raise the decking framework out of ground contact to increase the life and durability of timber components by eliminating absorption of ground moisture. The air gap beneath raised decking creates ventilation which allows timber components to fully dry (weather permitting), which helps to prevent fungus growth and rot.

The posts are notched for joists to sit on, there is also a 12mm bolt hole to secure the joist in place.

Dimensions: 100 x 100 x 900mm
Notch Dimensions: 45 x 83mm, 12mm bolt hole in middle

A concrete post for building raised decking; a heavy duty, durable alternative to timber posts. Raise the decking framework out of ground contact to increase the life and durability of timber components by eliminating absorption of ground moisture. The air gap beneath raised decking creates ventilation which allows timber components to fully dry (weather permitting), which helps to prevent fungus growth and rot.

The posts are notched for joists to sit on, there is also a 12mm bolt hole to secure the joist in place.

Dimensions: 100 x 100 x 600mm
Notch Dimensions: 45 x 83mm, 12mm bolt hole in middle

Easily adjustable plastic buckle tree ties with a spacer that fits between the tree and stake to prevent rubbing. Used for supporting small trees.
- Length: 600mm
- Width: 25mm

Birds Mouth Posts are specialist treated softwood posts for Knee Rail Fencing, also known as Trip Rail Fencing. A birds mouth 'V' notch is cut into the top of the post to fit a square knee rail.

Popular rail sizes include: 75mm x 75mm & 100 x 100mm (sold as Square Timber Posts). Rails are fixed in place with metal knee Rail Straps (find them in "fencing materials" > "metal fencing brackets").

- Dimensions: 100 x 100mm x 1.0m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

- Other sizes can be cut to order, give us a call 0117 9674382 to enquire