Posts & Postmix

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

- 150 x 150mm x 2.1m Timber Post
- Homegrown softwood
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
- 4 way weathered top (like a pyramid)
- Specified length includes the weathered top

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

- 150 x 150mm x 2.4m Timber Post
- Homegrown softwood
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
- 4 way weathered top (like a pyramid)
- Specified length includes the weathered top

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

- 150 x 150mm x 3.0m Timber Post
- Homegrown softwood
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
- Square ends, not weathered

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

- 150 x 150mm x 3.6m Timber Post
- Homegrown softwood
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
- Square ends, not weathered

Round timber pole; suitable for agricultural use and in domestic gardens for building garden structures, garden furniture, raised beds, and retaining walls etc. This size of pole is also popular for outdoor activities including obstacle courses, bridge building etc. Machine round poles are regularised to ensure a uniform size. Pressure treated to UC4 standard. These poles are chamfered both ends.

These round poles are prone to shakes (splits) and not suitable for use in commercial play equipment.

- 150mm Diameter x 3.0m
- Pole; chamfered both ends
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

Round timber pole; suitable for agricultural use and in domestic gardens for building garden structures, garden furniture, raised beds, and retaining walls etc. This size of pole is also popular for outdoor activities including obstacle courses, bridge building etc. Machine round poles are regularised to ensure a uniform size. Pressure treated to UC4 standard. These poles are chamfered both ends.

These round poles are prone to shakes (splits) and not suitable for use in commercial play equipment.

- 150mm Diameter x 3.6m
- Pole; chamfered both ends
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

- 175 x 175mm x 2.1m Timber Post
- Homegrown softwood
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
- 4 way weathered top (like a pyramid)
- Specified length includes the weathered top

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

- 175 x 175mm x 2.4m Timber Post
- Homegrown softwood
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
- 4 way weathered top (like a pyramid)
- Specified length includes the weathered top

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

- 175 x 175mm x 3.0m Timber Post
- Homegrown softwood
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
- Square ends, not weathered

2.0m Standard Angle Iron Stake, to suit 1400mm chain link mesh fencing.

- 40mm x 40mm Angle Iron
- 3mm Thick Steel
- Black Painted Finish
- Pointed end for driving into the ground
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

2.0m Standard Corner Straining post, to suit 1400mm chain link mesh fencing.
Price includes: 1 post , 2 struts, 2 stretcher bar, winders for line wire, all assembly bolts.

- 40mm x 40mm Angle Iron
- 5mm Thick Steel
- Black Painted Finish
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

2.0m Standard End Straining post, to suit 1400mm chain link mesh fencing.
Price includes: 1 post , 1 strut, 1 stretcher bar, winders for line wire, all assembly bolts.

- 40mm x 40mm Angle Iron
- 5mm Thick Steel
- Black Painted Finish
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

2.0m Standard Two Way Straining Post, to suit 1400mm chain link mesh fencing.
Used to strengthen a straight run of chain link fencing.
Price includes: 1 post , 2 struts, 2 stretcher bars, winders for line wire, all assembly bolts.

- 40mm x 40mm Angle Iron
- 5mm Thick Steel
- Black Painted Finish
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

2.1m slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2100mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 40kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

2.1m Standard Angle Iron Stake, to suit 1500mm chain link mesh fencing.

- 40mm x 40mm Angle Iron
- 3mm Thick Steel
- Black Painted Finish
- Pointed end for driving into the ground
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

2.1m Standard Corner Straining post, to suit 1500mm chain link mesh fencing.
Price includes: 1 post , 2 struts, 2 stretcher bar, winders for line wire, all assembly bolts.

- 40mm x 40mm Angle Iron
- 5mm Thick Steel
- Black Painted Finish
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

2.1m Standard End Straining post, to suit 1500mm chain link mesh fencing.
Price includes: 1 post , 1 strut, 1 stretcher bar, winders for line wire, all assembly bolts.

- 40mm x 40mm Angle Iron
- 5mm Thick Steel
- Black Painted Finish
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

2.1m Standard Two Way Straining Post, to suit 1500mm chain link mesh fencing.
Used to strengthen a straight run of chain link fencing.
Price includes: 1 post , 2 struts, 2 stretcher bars, winders for line wire, all assembly bolts.

- 40mm x 40mm Angle Iron
- 5mm Thick Steel
- Black Painted Finish
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

2.4m Heavy Duty Angle Iron Stake, to suit 1800mm chain link mesh fencing.

- 40mm x 40mm Angle Iron
- 5mm Thick Steel
- Galvanised Finish
- Pointed end for driving into the ground
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

2.4m Heavy Duty Angle Iron Stake, to suit 1800mm chain link mesh fencing.

- 40mm x 40mm Angle Iron
- 5mm Thick Steel
- Black Painted Finish
- Pointed end for driving into the ground
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

2.4m Heavy Duty Corner Straining post, to suit 1800mm chain link mesh fencing.
Price includes: 1 post , 2 struts, 2 stretcher bar, winders for line wire, all assembly bolts.

- 50mm x 50mm Angle Iron
- 6mm Thick Steel
- Black Painted Finish
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

2.4m Heavy Duty Corner Straining Post, to suit 1800mm chain link mesh fencing.
Used to strengthen a straight run of chain link fencing.
Price includes: 1 post , 2 struts, 2 stretcher bars, winders for line wire, all assembly bolts.

- 50mm x 50mm Angle Iron
- 6mm Thick Steel
- Galvanised Finish
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

2.4m Heavy Duty End Straining post, to suit 1800mm chain link mesh fencing.
Price includes: 1 post , 1 strut, 1 stretcher bar, winders for line wire, all assembly bolts.

- 50mm x 50mm Angle Iron
- 6mm Thick Steel
- Black Painted Finish
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

2.4m Heavy Duty End Straining post, to suit 1800mm chain link mesh fencing.
Price includes: 1 post , 1 strut, 1 stretcher bar, winders for line wire, all assembly bolts.

- 40mm x 40mm Angle Iron
- 6mm Thick Steel
- Galvanised Finish
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

2.4m Heavy Duty Two Way Straining Post, to suit 1800mm chain link mesh fencing.
Used to strengthen a straight run of chain link fencing.
Price includes: 1 post , 2 struts, 2 stretcher bars, winders for line wire, all assembly bolts.

- 50mm x 50mm Angle Iron
- 6mm Thick Steel
- Black Painted Finish
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

2.4m Heavy Duty Two Way Straining Post, to suit 1800mm chain link mesh fencing.
Used to strengthen a straight run of chain link fencing.
Price includes: 1 post , 2 struts, 2 stretcher bars, winders for line wire, all assembly bolts.

- 50mm x 50mm Angle Iron
- 6mm Thick Steel
- Galvanised Finish
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

2.4m slotted concrete Corner post; fully slotted on two adjacent sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 123mm x 130mm x 2400mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 66kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

2.4m slotted Concrete End Post; fully slotted on one side for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2400mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 50kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

2.4m slotted intermediate concrete post; fully slotted on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2400mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 46kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

2.4m Standard Angle Iron Stake, to suit 1800mm chain link mesh fencing.

- 40mm x 40mm Angle Iron
- 3mm Thick Steel
- Black Painted Finish
- Pointed end for driving into the ground
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

2.4m Standard Corner Straining post, to suit 1800mm chain link mesh fencing.
Price includes: 1 post , 2 struts, 2 stretcher bar, winders for line wire, all assembly bolts.

- 40mm x 40mm Angle Iron
- 5mm Thick Steel
- Black Painted Finish
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

2.4m Standard End Straining post, to suit 1800mm chain link mesh fencing.
Price includes: 1 post , 1 strut, 1 stretcher bar, winders for line wire, all assembly bolts.

- 40mm x 40mm Angle Iron
- 5mm Thick Steel
- Black Painted Finish
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

2.4m Standard Two Way Straining Post, to suit 1800mm chain link mesh fencing.
Used to strengthen a straight run of chain link fencing.
Price includes: 1 post , 2 struts, 2 stretcher bars, winders for line wire, all assembly bolts.

- 40mm x 40mm Angle Iron
- 5mm Thick Steel
- Black Painted Finish
- Pre-drilled holes for chain link line wires

* This is a special order item, typically available within 1-2 working days

2.7m slotted concrete corner post; fully slotted on two adjacent sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 123mm x 130mm x 2400mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 66kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

Slotted Concrete End Post; fully slotted on one side for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2700mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 56kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

2.7m slotted concrete post; fully slotted on both sides in a "H" design for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 2700mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 52kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses.

- 200 x 200mm x 2.4m Timber Post
- Homegrown softwood
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
- 4 way weathered top (like a pyramid)
- Specified length includes the weathered top

Round timber stake; suitable for agricultural use as straining posts and gate posts, also suitable for garden projects including; building garden structures, garden furniture, raised beds, and retaining walls etc. This size of stake is also popular for outdoor activities including obstacle courses, bridge building etc. Machine round stakes are regularised to ensure a uniform size. Pressure treated to UC4 standard.

These round poles are prone to shakes (splits) and not suitable for use in commercial play equipment.

- 200mm Diameter x 2.4m (Length includes point)
- Stake; Pointed bottom, chamfered top
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

Round timber pole; suitable for agricultural use and in domestic gardens for building garden structures, garden furniture, raised beds, and retaining walls etc. This size of pole is also popular for outdoor activities including obstacle courses, bridge building etc. Machine round poles are regularised to ensure a uniform size. Pressure treated to UC4 standard. These poles are chamfered both ends.

These round poles are prone to shakes (splits) and not suitable for use in commercial play equipment.

- 200mm Diameter x 3.0m
- Pole; chamfered both ends
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

Heavy duty concrete fence post for feather-edge fencing. This post has a weathered top; 3 recesses with bolt holes for fencing rails and bolt holes at the bottom to fit a gravel board. View image 2 for dimensions. This post is suitable for 1.35m feather edge boarding with a 150mm gravel board.

- Post Length: 2205mm
- Suitable for 1.35m Feather Edge + 150mm Gravel Board
- Three Recesses for 47 x 75mm Rail
- Use M8 x 180mm bolts to attach rails & gravel boards
- 67kg Each

Heavy duty concrete fence post for feather-edge fencing. This post has a back-weathered top, 3 recesses with bolt holes for fencing rails and bolt holes at the bottom to fit a gravel board. View image 2 for post dimensions. This post is designed to suit 1.65m feather edge boarding with a 150mm gravel board.

- Post Length: 2485mm
- Suitable for 1.65m Feather Edge + 150mm Gravel Board
- Three Recesses for 47 x 75mm Rail
- Use M8 x 180mm bolts to attach rails & gravel boards
- 73kg Each

3.0m slotted concrete post; fully slotted in a "H" design on both sides for timber fence panels and concrete gravel boards. Most fence panels will fit this post; check the slot dimensions below.

- Post Dimensions: 90mm x 110mm x 3000mm
- Slot Dimensions: 55mm (tapering to 50mm) x 23mm
- 58kg Each
- C50 Concrete (a strong mix)
- Four 5.5mm rebar set inside

Light duty round timber stake, popular for use as tree stakes to support small trees and shrubs, also suitable for light duty or temporary fencing. Machine rounded stakes are regularised to ensure a uniform size. Pressure treated to UC4 standard. These stakes are pointed (for driving in) & chamfered on the top.

- 50mm Diameter x 1.8m (Length includes point)
- Stake; pointed bottom, chamfered top
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

Light duty round timber stake, popular for use as tree stakes to support small trees and shrubs, also suitable for light duty or temporary fencing. Machine rounded stakes are regularised to ensure a uniform size. Pressure treated to UC4 standard. These stakes are pointed (for driving in) & chamfered on the top.

- 60mm Diameter x 2.4m (Length includes point)
- Stake; pointed bottom, chamfered top
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 75 x 100mm x 1.8m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 75 x 100mm x 2.4m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green

Sawn timber post, pressure treated green. Mainly used for post & rail fencing, these posts have one flat end & one 30° back-weathered end to help prevent the top from rotting by allowing water to run off. Please note; the stated length includes the weathered top.

- 75 x 125mm x 1.8m Timber Post
- Homegrown softwood
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
- 30° back-weathered top

Sawn timber post, pressure treated green. Mainly used for post & rail fencing, these posts have a 30° back-weathered top to help prevent rotting by allowing water to run off. Please note; the stated length includes the weathered top.

- 75 x 125mm x 2.4m Timber Post
- Homegrown softwood
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
- 30° back-weathered top

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts for post and rail fencing but could have many other uses.

- Dimensions: 75 x 150mm x 2.1m
- Homegrown Softwood, locally produced in the UK
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 75 x 75mm x 1.8m
- Homegrown Softwood, locally produced in the UK
- Sawn & incised finish
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green