Post Hole Digger - Roughneck

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green

Carriage Bolt; cup square hex, 30mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

Steel washer, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Dimensions: 2mm x 28mm Diameter
13mm Bolt Hole: To suit M12 thread

Half round timber stake, popular for agricultural and equestrian fencing. Can also be used in domestic gardens to support small trees and shrubs, build garden structures, garden furniture, raised beds, and retaining walls etc. Machine round stakes are regularised to ensure a uniform size. Pressure treated to UC4 standard. These stakes are pointed (for driving in) & chamfered on the top.

- 100mm Diameter x 1.8m (Length includes point)
- Stake; pointed bottom, flat top
- Good quality, slow grown redwood
- UC4 pressure treatment, 15 year guarantee

Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts.

Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature).
Simply half fill the hole with water, then pour the post mix in.

Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size).

We offer 33% discount on post-mix when you pay & collect in store!

A concrete post for building raised decking; a heavy duty, durable alternative to timber posts. Raise the decking framework out of ground contact to increase the life and durability of timber components by eliminating absorption of ground moisture. The air gap beneath raised decking creates ventilation which allows timber components to fully dry (weather permitting), which helps to prevent fungus growth and rot.

The posts are notched for joists to sit on, there is also a 12mm bolt hole to secure the joist in place.

Dimensions: 100 x 100 x 900mm
Notch Dimensions: 45 x 83mm, 12mm bolt hole in middle