900 x 1800mm Milano Gate

A self-tapping Masonry Screw for brick and concrete, a popular fixing to fit window frames. An easy to use fixing that does not require plastic plugs, it has a high resistance to fire compared to nylon fixings. This screw is a friction fixing which minimises expansion stress in the base material, this allows fixing near to the edge, and gives greater loading performance than most nylon fixings.
To use: pre-drill a 6mm pilot hole, use a drill or impact driver fitted with T30 bit to drive the screw in.

T30 bit and white cover caps included when bought in box quantities of 100.

Drill Bit Dia. - 6mm
Min. Embed Depth - 45mm
Head Type - T30 Torx
Driver Type - Drill / Impact Driver

Premium quality planed finish Picket Slats. Machined from 22 x 75mm joinery grade Scandinavian redwood, pressure treated green with a 15 year guarantee. Picket Slats are sold individually; build the fence to your own specification.

- Dimensions: 20 x 70 x 900mm (finished sizes)
- Round Top
- Planed all round
- Premium Quality Scandinavian Redwood
- Pressure treated with 15 Year Guarantee - details in downloads tab below

If you would like help to calculate the materials you need, please give us a call 0117 9674382.

A sturdy yet affordable Overlap Panel which is built to last.

- 6' wide x 6' high (1829mm wide x 1829mm high)
- Fully pressure treated panels
- Nailed construction
- Waney-edge, horizontal, sawn-finish slats
- Five vertical battens one side and three vertical battens on the other side (approx. 16 x 38mm)
- Framed top and bottom on one side (approx. 18 x 50mm)
- Finished and protected with a top capping strip
- Manufactured in the U.K.

General purpose, pressure treated, sawn finish timber. Mainly used for agricultural post & rail fencing (also known as motorway fencing) and feather-edge fencing.

- Dimensions: 38 x 88mm x 4.2m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

The Milano fence panel is a good quality, well-made, decorative fence panel. It looks the same from both sides; perfect for shared boundaries. These panels are constructed with ‘hit & miss’ slats that allow wind to pass through. This panel has a smooth machined finish and is pressure treated green.

Height: 1800mm (approx. 6')
Width: 1800mm
Depth: 45mm

Please note: This panel is 1800mm wide, not 1829mm (6’), you can increase the panel width to 1829mm by attaching panel packing strips, sold separately.

This kit includes a pair of 350mm tee hinges, an auto gate catch & all the screws required to fit them.
Ideal for hanging small gates like the hampton & picket gates.