M6 Hex Nut

A heavy steel washer, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Dimensions: 1.5mm x 13.5mm Diameter
6.5mm Bolt Hole: To suit M6 thread

Carriage Bolt; cup square hex, 16mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber.

Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened.

Supplied with one standard hex nut, washers sold separately.

Roofing Bolt; designed for bolting through metal sheets but have many other uses.
14mm bolt head, with 2mm cross-slots to fit flat head screw driver blade.
Supplied with one square nut, hex nuts and washers sold separately.
BZP finish (Bright Zinc Plate).

Pointed Pegs can be used for many purposes e.g. securing Gravel Boards and Sleepers, or as survey (marking out) pegs in the construction industry.

Our square Pointed Pegs are pressure treated green. Standard stock sizes are listed, bespoke sizes can be cut to order.

Timber batten is a general purpose building material that has many uses for trade and DIY.

- Fine-sawn finish
- Pressure treated green
- This batten does not comply with BS5534, we stock blue batten which does meet this grade.

This tough geotextile, woven fabric successfully meets the demands of soft and hard landscaping.
Groundtex works above ground as a heavy duty weed barrier. It has excellent strength and tear resistance, and can also be used below ground as a stabilising and separating geotextile in groundwork and civil engineering applications.

Groundtex can be used beneath Type 1 aggregate, sharp / angular stone and gravel, including areas subject to pedestrian or vehicular traffic.