M10 x 180mm Coach Screw

Steel washer, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Dimensions: 2mm x 24mm Diameter
11mm Bolt Hole: To suit M10 thread

Fine sawn finish timber post cap for 100 x100mm posts, pressure treated green. Protects post ends from weather and provides a smart finishing touch.

- Dimensions: 26mm x 119mm x 119mm
- Chamfered four sides
- Pressure treated

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 100 x 100mm x 1.8m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts.

Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature).
Simply half fill the hole with water, then pour the post mix in.

Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size).

We offer 33% discount on post-mix when you pay & collect in store!

Concrete repair spurs are used when a wooden fence post has snapped or rotted off at ground level. If the fencing above ground level is still servicable; extend the life of the fence by fitting a repair spur. Tips on how to fit a Repair Spur in 'Full Description' tab (below).

- Dimensions: 100 x 100 x 1220mm
- Three bolt holes for M10 Carriage Bolts or M10 Coach Screws
- 26kg

Softwood sleeper, pressure treated green, sawn finish, non-structural timber. Mainly used for landscaping projects; for raised beds and retaining walls but could have many other uses.

- Dimensions: 100 x 200mm x 1.2m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green