Gravel Boards & Path Edging

Concrete gravel boards slot between concrete posts to give fence panels a level surface to sit on. It is beneficial to use gravel boards if the ground is sloping; the gravel board is dug into the ground to create a level surface instead of digging in the fence panel. Raising the panel on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers.

- Dimensions: 45mm x 300mm x 1829mm
- 44kg Each
- C50 Concrete (a strong mix)
- Three 5.5mm rebar set inside.

These concrete gravel boards are designed to be used with recessed concrete posts. Concrete gravel boards for recessed posts give feather edge fencing a level surface to sit on. Raising feather edge boards on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers.

- Dimensions: 50mm x 150mm x 2400mm
- 40kg Each
- C50 Concrete (a strong mix)
- Two 5.5mm rebar set inside
- One 14mm diameter hole in the middle to attach a support post (if required)

These concrete gravel boards are designed to be used with recessed concrete posts. Concrete gravel boards for recessed posts give feather edge fencing a level surface to sit on. Raising feather edge boards on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers.

- Dimensions: 50mm x 150mm x 3000mm
- 52kg Each
- C50 Concrete (a strong mix)
- Two 5.5mm rebar set inside
- One 14mm diameter hole in the middle to attached a support post (if required)

Pointed Pegs can be used for many purposes e.g. securing Gravel Boards and Sleepers, or as survey (marking out) pegs in the construction industry.

Our square Pointed Pegs are pressure treated green. Standard stock sizes are listed, bespoke sizes can be cut to order.

Pointed Pegs can be used for many purposes e.g. securing Gravel Boards and Sleepers, or as survey (marking out) pegs in the construction industry.

Our square Pointed Pegs are pressure treated green. Standard stock sizes are listed, bespoke sizes can be cut to order.

450mm Metal Peg, also known as a metal fence pin. This sturdy steel peg is suitable for path and edging, and for securing fencing gravel boards. The small profile of the peg makes it easier to drive into hard ground than the larger timber equivalent.

- 25mm x 25mm Steel Angle
- 2.0mm Thick Steel
- Galvanised
- Pointed to drive
- Three 6mm diameter holes in the corner for fixings

A metal stake (pin) designed for installation of timber sleepers, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground.

- Total Length: 440mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Fixing plate: 75mm x 117mm (overall)
- Fixing Holes: 4 x 8mm diameter
- Galvanised finish

A metal stake (pin) designed for installation of timber sleepers, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground. This sleeper pin is galvanised and powder coated olive green.

- Total Length: 440mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Fixing plate: 75mm x 117mm (overall)
- Fixing Holes: 4 x 8mm diameter
- Galvanised + powder coated; Olive Green (RAL 7002)
- Olive coloured fixings available

A metal stake (pin) designed for installation of a double layer of 100 x 200mm timber sleepers stacked on their edge, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground.

- Total Length: 750mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Fixing plate: 360mm x 117mm (overall)
- Fixing Holes: 8 x 8mm diameter
- Galvanised finish

A metal stake (pin) designed for installation of a double layer of 100 x 200mm timber sleepers stacked on their edge, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground. This sleeper pin is galvanised and powder coated olive green.

- Total Length: 750mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Fixing plate: 360mm x 117mm (overall)
- Fixing Holes: 8 x 8mm diameter
- Galvanised + powder coated; Olive Green (RAL 7002)
- Olive coloured fixings available

A metal corner stake (pin) designed for installation of timber sleepers, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground.

- Total Length: 440mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Corner Fixing plate: 75mm x 70mm (each side)
- Fixing Holes: 4 x 8mm diameter
- Galvanised finish

A metal corner stake (pin) designed for installation of timber sleepers, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground. This sleeper pin is galvanised and powder coated olive green.

- Total Length: 440mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Corner Fixing plate: 75mm x 70mm (each side)
- Fixing Holes: 4 x 8mm diameter
- Galvanised + powder coated; Olive Green (RAL 7002)
- Olive coloured fixings available

A metal corner stake (pin) designed for installation of a double layer of 100 x 200mm timber sleepers stacked on their edge, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground.

- Total Length: 750mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Corner Fixing plate: 360mm x 70mm (each side)
- Fixing Holes: 4 x 8mm diameter
- Galvanised finish

A metal corner stake (pin) designed for installation of a double layer of 100 x 200mm timber sleepers stacked on their edge, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground. This sleeper pin is galvanised and powder coated olive green.

- Total Length: 750mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Corner Fixing plate: 360mm x 70mm (each side)
- Fixing Holes: 4 x 8mm diameter
- Galvanised + powder coated; Olive Green (RAL 7002)
- Olive coloured fixings available