Field Gate Catches

Gravity catch to fit a 75 x 75mm wooden post (*post not included). This galvanised gravity catch is designed to hold a wooden five bar gate in the open position. The catch works by retaining the bottom rail of the gate when it's pushed open, metal plates are included to protect the gate rail from damage through use. The weighted design allows the catch work automatically and is foot operated to release the gate.

Set includes:
- The gate catch
- Two metal rail protection plates
- One metal plate to fit around post mortice

Post & fixings sold separately

Padlockable gate catch, that stays shut once the striker has gone into the keep.
Fixings included.

Throw Over Gate Loops are used to secure a pair of wooden five bar gates in the middle when in the closed position. The galvanised gate loop is fitted to the top rail of the closing gate with the included carriage bolt, for best results; drop bolts should also be fitted to secure the bottom of both gates (sold separately).

Overall Length: 350mm
Maximum Top Rail Width: 75mm
Minimum Top Rail Depth: 75mm
Galvanised finish
Carriage bolt included

The New Zealand (NZ) Gate Fastener is a basic form of gate catch, typically used to secure field gates. The heavy-duty fastener hook has a spring loaded catch to prevent accidental opening. For extra security a padlock (not included) could be attached through the chain. Galvanised finish.

Staple:
Diameter: 8mm
Length: 65mm
Width: 45mm

Chain:
Length: 420mm
Links: 6mm diameter x 25mm x 30mm

Fastener:
Length: 100mm
Diameter: 12mm

A central closing catch designed to suit the spring gate fastener set. This catch enables the gate to be latched when hung between posts instead of on the back of posts. Galvanised finish for durability.

Catch length: 150mm
Catch depth: 35mm (max)
Fixing holes: two holes - 12mm Ø