Decking & Landscaping

Softwood sleeper, pressure treated green, sawn finish, non-structural timber. Mainly used for landscaping projects; for raised beds and retaining walls but could have many other uses.

- Dimensions: 125 x 250mm x 3.0m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

Softwood sleeper, pressure treated green, sawn finish, non-structural timber. Mainly used for landscaping projects; for raised beds and retaining walls but could have many other uses.

- Dimensions: 125 x 250mm x 3.6m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

New, untreated European Oak sleeper. A naturally durable sleeper without chemical preservative. Mainly used for landscaping projects; including raised beds and retaining walls but could have many other uses.

There are around 600 different Oak species, they aren’t all naturally durable. We only source Quercus Robur and Quercus Petraea which both have naturally durable heartwood.

These sleepers have a sawn finish, they are suitable for non-structural projects (not to be used as beams or lintels).

To understand the characteristics of Oak sleepers, please read our product specification guide in the downloads tab below.

A metal stake (pin) designed for installation of timber sleepers, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground.

- Total Length: 440mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Fixing plate: 75mm x 117mm (overall)
- Fixing Holes: 4 x 8mm diameter
- Galvanised finish

A metal stake (pin) designed for installation of timber sleepers, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground. This sleeper pin is galvanised and powder coated olive green.

- Total Length: 440mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Fixing plate: 75mm x 117mm (overall)
- Fixing Holes: 4 x 8mm diameter
- Galvanised + powder coated; Olive Green (RAL 7002)
- Olive coloured fixings available

A metal stake (pin) designed for installation of a double layer of 100 x 200mm timber sleepers stacked on their edge, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground.

- Total Length: 750mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Fixing plate: 360mm x 117mm (overall)
- Fixing Holes: 8 x 8mm diameter
- Galvanised finish

A metal stake (pin) designed for installation of a double layer of 100 x 200mm timber sleepers stacked on their edge, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground. This sleeper pin is galvanised and powder coated olive green.

- Total Length: 750mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Fixing plate: 360mm x 117mm (overall)
- Fixing Holes: 8 x 8mm diameter
- Galvanised + powder coated; Olive Green (RAL 7002)
- Olive coloured fixings available

A metal corner stake (pin) designed for installation of timber sleepers, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground.

- Total Length: 440mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Corner Fixing plate: 75mm x 70mm (each side)
- Fixing Holes: 4 x 8mm diameter
- Galvanised finish

A metal corner stake (pin) designed for installation of timber sleepers, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground. This sleeper pin is galvanised and powder coated olive green.

- Total Length: 440mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Corner Fixing plate: 75mm x 70mm (each side)
- Fixing Holes: 4 x 8mm diameter
- Galvanised + powder coated; Olive Green (RAL 7002)
- Olive coloured fixings available

A metal corner stake (pin) designed for installation of a double layer of 100 x 200mm timber sleepers stacked on their edge, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground.

- Total Length: 750mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Corner Fixing plate: 360mm x 70mm (each side)
- Fixing Holes: 4 x 8mm diameter
- Galvanised finish

A metal corner stake (pin) designed for installation of a double layer of 100 x 200mm timber sleepers stacked on their edge, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground. This sleeper pin is galvanised and powder coated olive green.

- Total Length: 750mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Corner Fixing plate: 360mm x 70mm (each side)
- Fixing Holes: 4 x 8mm diameter
- Galvanised + powder coated; Olive Green (RAL 7002)
- Olive coloured fixings available

A metal fixing plate designed for joining sleepers but could have many uses.

- 80mm x 170mm x 2.0mm
- 8 x 8mm diameter fixing holes
- Galvanised finish

A metal fixing plate designed for joining sleepers but could have many uses. This fixing plate is galvanised and powder coated olive green.

- 80mm x 170mm x 2.0mm
- 8 x 8mm diameter fixing holes
- Galvanised + powder coated; Olive Green (RAL 7002)
- Olive coloured fixings available

A large, heavy duty right angled fixing plate designed for joining sleepers but could have many uses.

- 81mm x 85mm x 2.0mm (each side)
- 8 x 8mm diameter fixing holes
- Galvanised finish

A large, heavy duty right angled fixing plate designed for joining sleepers but could have many uses. This bracket is galvanised and powder coated olive green.

- 81mm x 85mm x 2.0mm (each side)
- 8 x 8mm diameter fixing holes
- Galvanised + powder coated; Olive Green (RAL 7002)
- Olive coloured fixings available