Decking & Landscaping

A mix of 14mm clean chipping and a 0-4mm dust which is perfect for a concrete mix.

Average coverage: 4 bags = 1m² based on 50mm depth
We offer 25% discount on this product when you pay & collect in store (BS30 5JW)!

Average coverage: 4 bags = 1m² based on 50mm depth
We offer 25% discount on this product when you pay & collect in store (BS30 5JW)!

Average coverage: 4 bags = 1m² based on 50mm depth
We offer 25% discount on this product when you pay & collect in store (BS30 5JW)!

The Hutton Avon Garden Arch with its long straight lines would complement any garden, planed square trellis to the sides and a conventional square top section makes it an ideal choice for any garden.
British Made using slow grown joinery grade redwood sourced from sustainably certified Scandinavian Forests, the Avon Garden Arch is pressure treated for durability.

Supplied flat packed for easy transportation, this product is simple to assemble using the supplied fixings.

Dimensions:
Height: 2400mm (includes 400mm for fixing into ground)
Width: 1510mm
Depth: 740mm

This product is special ordered in - typical availability is 2-3 weeks (may vary - please check before ordering if you require by a certain date).

The Ashby Picnic Table a perfect choice for any garden setting where you can while away a summers evening with family and friends over a long cool drink. Seating 4 adults comfortably it is robust and durable giving you many years of good service. This Premium product is made using slow grown joinery grade redwood sourced from sustainably certified Scandinavian Forests giving it impressive eco credentials and a low carbon footprint.

Supplied flat packed for easy transportation, this product is simple to assemble using the supplied fixings.

Dimensions:
Height: 740mm
Length: 1180mm
Width: 1530mm
Table Top: 680 x 1180mm

This product is special ordered in - typical availability is 2-3 weeks (may vary - please check before ordering if you require by a certain date).

A large, heavy duty right angled fixing plate designed for joining sleepers but could have many uses. This bracket is galvanised and powder coated olive green.

- 81mm x 85mm x 2.0mm (each side)
- 8 x 8mm diameter fixing holes
- Galvanised + powder coated; Olive Green (RAL 7002)
- Olive coloured fixings available

A large, heavy duty right angled fixing plate designed for joining sleepers but could have many uses.

- 81mm x 85mm x 2.0mm (each side)
- 8 x 8mm diameter fixing holes
- Galvanised finish

Planed decking newel post with 2 grooves machined at the top. Pressure treated for durability.

A metal fixing plate designed for joining sleepers but could have many uses. This fixing plate is galvanised and powder coated olive green.

- 80mm x 170mm x 2.0mm
- 8 x 8mm diameter fixing holes
- Galvanised + powder coated; Olive Green (RAL 7002)
- Olive coloured fixings available

A metal fixing plate designed for joining sleepers but could have many uses.

- 80mm x 170mm x 2.0mm
- 8 x 8mm diameter fixing holes
- Galvanised finish

Manufactured in the UK using slow grown Scandinavian Redwood. These high quality, fully pressure treated garden sheds are built to last.

- Availability: typically 2-3 weeks from order*
- Supplied flat packed in pre-assembled sections (assembly instructions in downloads tab below)
- ex. 38 x 50mm framework
- ex. 19 x 125mm shiplap cladding (15mm finished thickness)
- Floor & roof sections produced using ex. 25 x 125mm T&G (20mm finished thickness)
- Constructed with stainless steel nails
- Perspex window on 2 of the side panels (either both windows on one side, or one window on each side)
- Shed felt included
- 15 Year Treated Right Warranty

*If you need the shed by a certain date, please let us know so we can get an accurate ETA

A metal stake (pin) designed for installation of a double layer of 100 x 200mm timber sleepers stacked on their edge, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground. This sleeper pin is galvanised and powder coated olive green.

- Total Length: 750mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Fixing plate: 360mm x 117mm (overall)
- Fixing Holes: 8 x 8mm diameter
- Galvanised + powder coated; Olive Green (RAL 7002)
- Olive coloured fixings available

A metal stake (pin) designed for installation of a double layer of 100 x 200mm timber sleepers stacked on their edge, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground.

- Total Length: 750mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Fixing plate: 360mm x 117mm (overall)
- Fixing Holes: 8 x 8mm diameter
- Galvanised finish

A metal corner stake (pin) designed for installation of a double layer of 100 x 200mm timber sleepers stacked on their edge, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground. This sleeper pin is galvanised and powder coated olive green.

- Total Length: 750mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Corner Fixing plate: 360mm x 70mm (each side)
- Fixing Holes: 4 x 8mm diameter
- Galvanised + powder coated; Olive Green (RAL 7002)
- Olive coloured fixings available

A metal corner stake (pin) designed for installation of a double layer of 100 x 200mm timber sleepers stacked on their edge, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground.

- Total Length: 750mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Corner Fixing plate: 360mm x 70mm (each side)
- Fixing Holes: 4 x 8mm diameter
- Galvanised finish

Softwood sleeper, pressure treated green, sawn finish, non-structural timber. Mainly used for landscaping projects; for raised beds and retaining walls but could have many other uses.

- Dimensions: 75 x 225mm x 3.6m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

Softwood sleeper, pressure treated green, sawn finish, non-structural timber. Mainly used for landscaping projects; for raised beds and retaining walls but could have many other uses.

- Dimensions: 75 x 225mm x 3.0m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

Softwood sleeper, pressure treated green, sawn finish, non-structural timber. Mainly used for landscaping projects; for raised beds and retaining walls but could have many other uses.

- Dimensions: 75 x 225mm x 2.4m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

Manufactured in the UK using slow grown Scandinavian Redwood. These high quality, fully pressure treated garden sheds are built to last.

- Availability: typically 2-3 weeks from order*
- Supplied flat packed in pre-assembled sections (assembly instructions in downloads tab below)
- ex. 38 x 50mm framework
- ex. 19 x 125mm shiplap cladding (15mm finished thickness)
- Floor & roof sections produced using ex. 25 x 125mm T&G (20mm finished thickness)
- Constructed with stainless steel nails
- 1x Perspex window on one 8' side (can be fitted on either of the 8' sides)
- Shed felt included
- 15 Year Treated Right Warranty

*If you need the shed by a certain date, please let us know so we can get an accurate ETA

Average coverage: 4 bags = 1m² based on 50mm depth
We offer 25% discount on this product when you pay & collect in store (BS30 5JW)!

This stringer is manufactured from a single piece of 47mm x 250mm timber, pressure treated for use outdoors. Ideal for decking projects.

185mm Rise (Step Height)
220mm Going (Tread Depth)
40° Pitch
Total rise = 925mm

Pre-Cut Noggins (45x95mm) for Stronger Composite Decking. Save time and effort with pre-cut noggins for 300mm joist centres. Pressure treated for durability.
- Machined from 47 x 100mm, finished size approx. 45 x 95mm
- Smooth regularised finish
- Good quality, slow grown softwood

If you aren't sure how many noggins you need for your timber framework, please get in touch for advice.

Premium treated timber carcassing for general purpose building projects.
- Machined from 47 x 75mm, finished size approx. 45 x 70mm
- Smooth regularised finish
- Grade C16 / C24 - mixed
- Good quality, slow grown softwood
- Pressure treated green

Treated carcassing timber for general purpose building.
- Machined from 47 x 75mm, finished size approx. 45 x 70mm
- Smooth regularised finish
- Grade C16 / C24 - mixed
- Good quality, slow grown softwood
- Pressure treated green

Treated carcassing timber for general purpose building.
- Machined from 47 x 75mm, finished size approx. 45 x 70mm
- Smooth regularised finish
- Grade C16 / C24 - mixed
- Good quality, slow grown softwood
- Pressure treated green