Decking & Landscaping

- Precision-machined profile from 38 x 125mm timber, finishing at approximately 33 x 120mm.
- Forged from high-quality Redwood, guaranteeing strength and longevity.
- Pressure treated for added durability, supported by a 15-year warranty.
- Maximum joist spacing of 600mm, for effortless installation.

Treated carcassing timber conquers outdoor projects!
- Machined from 47 x 150mm, finished size approx. 45 x 145mm
- Smooth finish and C24 graded
- Premium quality, slow-grown softwood
- Pressure-treated green for durability

Choose our treated carcassing timber for your DIY projects!
- Machined from 47 x 125mm, finished size approx. 45 x 120mm
- Smooth regularised finish
- Grade C24
- Good quality, slow grown softwood
- Pressure treated green

A concrete post for building raised decking; a heavy duty, durable alternative to timber posts. Raise the decking framework out of ground contact to increase the life and durability of timber components by eliminating absorption of ground moisture. The air gap beneath raised decking creates ventilation which allows timber components to fully dry (weather permitting), which helps to prevent fungus growth and rot.

The posts are notched for joists to sit on, there is also a 12mm bolt hole to secure the joist in place.

Dimensions: 100 x 100 x 600mm
Notch Dimensions: 45 x 83mm, 12mm bolt hole in middle

Softwood sleeper, pressure treated green, sawn finish, non-structural timber. Mainly used for landscaping projects; for raised beds and retaining walls but could have many other uses.

- Dimensions: 100 x 200mm x 1.2m
- Sawn Finish
- Homegrown Softwood, locally produced in the UK
- Pressure Treated - Green

Pressure-treated carcassing timber conquers outdoor projects!
- Machined from 47 x 100mm, finished size approx. 45 x 95mm
- Smooth regularised finish
- Grade C24
- Good quality, slow grown softwood
- Pressure treated green

- Showcasing a groove pattern on both sides for improved visual appeal and functionality.
- Fashioned from high-quality Redwood, guaranteeing strength and longevity.
- Treated with green pressure for added durability, supported by a 15-year Treated-Right Warranty.
- Allows for maximum joist spacing of 600mm, facilitating effortless installation.
- Available since 2002, highlighting its unwavering popularity and exceptional quality.

This tough geotextile, woven fabric successfully meets the demands of soft and hard landscaping.
Groundtex works above ground as a heavy duty weed barrier. It has excellent strength and tear resistance, and can also be used below ground as a stabilising and separating geotextile in groundwork and civil engineering applications.

Groundtex can be used beneath Type 1 aggregate, sharp / angular stone and gravel, including areas subject to pedestrian or vehicular traffic.

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 100 x 100mm x 1.8m
- Homegrown Softwood, locally produced in the UK
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green

- Discover our exclusive 5th grade Redwood Softwood Decking
- Crafted from 38 x 125mm timber, finished around 33 x 120mm
- Boasts a unique dual-sided groove pattern
- Pressure treated green, with a reassuring 15-year warranty
- Easy installation with maximum joist centres of 600mm
- In demand since 2002, a testament to its enduring appeal.

A metal stake (pin) designed for installation of a double layer of 100 x 200mm timber sleepers stacked on their edge, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground. This sleeper pin is galvanised and powder coated olive green.

- Total Length: 750mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Fixing plate: 360mm x 117mm (overall)
- Fixing Holes: 8 x 8mm diameter
- Galvanised + powder coated; Olive Green (RAL 7002)
- Olive coloured fixings available

A metal corner stake (pin) designed for installation of a double layer of 100 x 200mm timber sleepers stacked on their edge, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground. This sleeper pin is galvanised and powder coated olive green.

- Total Length: 750mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Corner Fixing plate: 360mm x 70mm (each side)
- Fixing Holes: 4 x 8mm diameter
- Galvanised + powder coated; Olive Green (RAL 7002)
- Olive coloured fixings available

Treated carcassing timber and general purpose building timber - your one-stop shop for strong and reliable building projects.
- Machined from 47 x 100mm, finished size approx. 45 x 95mm
- Smooth regularised finish
- Grade C24
- Good quality, slow grown softwood
- Pressure treated green

Premium treated timber carcassing for general purpose building projects.
- Machined from 47 x 75mm, finished size approx. 45 x 70mm
- Smooth regularised finish
- Grade C16 / C24 - mixed
- Good quality, slow grown softwood
- Pressure treated green

Timber carcassing, general purpose building timber.

- Machined from 47 x 150mm, finished size approx. 45 x 145mm
- Smooth regularised finish
- Grade C24
- Good quality, slow-grown softwood
- Pressure-treated green

- Premium 5th grade Redwood Softwood Decking
- Machined from 38 x 125mm timber to approx. 33 x 120mm
- Dual-sided groove pattern
- Pressure treated green with 15-year warranty
- Maximum joist centres of 600mm.

Premium Quality Softwood Decking

- Profile machined from 32 x 125mm timber, finished size approx. 28 x 120mm
- Dual sided pattern - smooth / grooved
- Machined from 5th grade Redwood, quality slow-grown material
- Pressure treated green, 15 year Treated-Right Warranty, details in Downloads tab below
- Maximum joist centres - 450mm
- We have stocked this decking profile since 2010 due to popularity

Average coverage: 4 bags = 1m² based on 50mm depth
We offer 25% discount on this product when you pay & collect in store (BS30 5JW)!

Composite Prime starter clip & screw for securing Composite Prime HD Deck® Dual and Pro boards.

- Box of 20 clips + screws
- This clip will fit Composite Prime HD Deck® Dual and Pro boards
- Starter clips are used to fix down the first and last deck boards
- Includes black stainless steel screw
- Clip system enables composite boards to expand and contract without buckling
- Fitting guide in Download tab below

Composite Prime starter clip & screw for securing Composite Prime HD Deck® XS Deck Boards.

- Box of 20 clips + screws
- This clip is compatible with Composite Prime HD Deck® XS deck boards
- Starter clips are used to fix down the first and last deck boards
- Includes black stainless steel screw
- Clip system enables composite boards to expand and contract without buckling
- Fitting guide in Download tab below

25kg Cement - Manufacturer may vary

A metal corner stake (pin) designed for installation of a double layer of 100 x 200mm timber sleepers stacked on their edge, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground.

- Total Length: 750mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Corner Fixing plate: 360mm x 70mm (each side)
- Fixing Holes: 4 x 8mm diameter
- Galvanised finish

A metal stake (pin) designed for installation of a double layer of 100 x 200mm timber sleepers stacked on their edge, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground.

- Total Length: 750mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Fixing plate: 360mm x 117mm (overall)
- Fixing Holes: 8 x 8mm diameter
- Galvanised finish

Treated carcassing timber for general building projects.

- Machined from 47 x 100mm, finished size approx. 45 x 95mm
- Smooth regularised finish
- Grade C24
- Good quality, slow grown softwood
- Pressure treated green

- Machined from 38 x 125mm timber to approximately 33 x 120mm
- Dual-sided groove pattern for enhanced aesthetics and performance
- Crafted from 5th grade Redwood for durability and longevity
- Pressure treated green, backed by a 15-year warranty
- Maximum joist centres of 600mm for easy installation
- Continuously stocked since 2002