Decking & Landscaping

Machined to fit within the rebate on our hand & base rail, this pressure treated spindle spacer is supplied in 3.3m lengths.

20mm clean limestone is commonly used for drainage, landscaping or as decorative stone.

Average coverage: 4 bags = 1m² based on 50mm depth
We offer 25% discount on this product when you pay & collect in store (BS30 5JW)!

A mix of 14mm clean chipping and a 0-4mm dust which is perfect for a concrete mix.

Average coverage: 4 bags = 1m² based on 50mm depth
We offer 25% discount on this product when you pay & collect in store (BS30 5JW)!

A blend of aggregates suitable for use in patio bases or foundations. Compact well to make a stable foundation for patios, sheds, paths etc.

Average coverage: 4 bags = 1m² based on 50mm depth
We offer 25% discount on this product when you pay & collect in store (BS30 5JW)!

Sharp Sand has coarse grains with angular edges. Common uses include:
- Making concrete
- Patio construction
- Improving drainage in soil

Sold in easy to transport bags

Average coverage: 4 bags = 1m² based on 50mm depth
We offer 25% discount on this product when you pay & collect in store (BS30 5JW)!

A metal corner stake (pin) designed for installation of timber sleepers, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground.

- Total Length: 440mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Corner Fixing plate: 75mm x 70mm (each side)
- Fixing Holes: 4 x 8mm diameter
- Galvanised finish

A metal stake (pin) designed for installation of timber sleepers, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground.

- Total Length: 440mm
- Stake Profile: 35mm x 35mm x 2.0mm
- Fixing plate: 75mm x 117mm (overall)
- Fixing Holes: 4 x 8mm diameter
- Galvanised finish

Do you need timber cut to length? We'll do the hard work for you!

We can cross-cut all of our timber products to length, including our Oak & treated softwood sleepers.

All cross-cutting is to a tolerance of ±2mm. We are only able to offer 90° cuts.

Please note: due to the blade dimensions, approx. 4mm of timber is removed per cut, this is known as the blade kerf E.G. if you start with a 2400mm sleeper and cut off three 600mm lengths, the remaining off-cut will be approx. 588mm long. Please consider this when calculating your requirements.

We will only machine our own timber, if your order requires a lot of machining, please contact us to discuss your requirements.

We are unable to accept returns if products have been cut to order.

When timber has been cut to length we recommend applying end grain preservative to the cut areas. For larger orders that involve a lot of cutting, we recommend our pressure-treatment service. The treatment process takes about one week, price is based on the total volume of timber to be treated, the minimum charge is £80 +VAT (£96 inc. VAT). Contact us for more information.

- 41mm x 41mm square spindles.
- Pressure treated for durability.
- Based on a gap of 99mm in between spindles, 7.14 spindles cover 1 metre.

A large, heavy duty right angled fixing plate designed for joining sleepers but could have many uses. This bracket is galvanised and powder coated olive green.

- 81mm x 85mm x 2.0mm (each side)
- 8 x 8mm diameter fixing holes
- Galvanised + powder coated; Olive Green (RAL 7002)
- Olive coloured fixings available

Pre-cut noggin to suit 450mm joist centres, a popular joist centre for timber decking. Building noggins into framework will significantly increase strength and rigidity. Pre-cut noggins make building framework quicker, easier and more accurate than cutting noggins on site. No need to re-treat cut ends as they are fully pressure treated.

- Machined from 47 x 150mm, finished size approx. 45 x 145mm
- Smooth regularised finish
- Good quality, slow grown softwood
- Pressure treated green

If you aren't sure how many noggins you need for your timber framework, please get in touch for advice.

A large, heavy duty right angled fixing plate designed for joining sleepers but could have many uses.

- 81mm x 85mm x 2.0mm (each side)
- 8 x 8mm diameter fixing holes
- Galvanised finish

A metal fixing plate designed for joining sleepers but could have many uses. This fixing plate is galvanised and powder coated olive green.

- 80mm x 170mm x 2.0mm
- 8 x 8mm diameter fixing holes
- Galvanised + powder coated; Olive Green (RAL 7002)
- Olive coloured fixings available

A metal fixing plate designed for joining sleepers but could have many uses.

- 80mm x 170mm x 2.0mm
- 8 x 8mm diameter fixing holes
- Galvanised finish

Pre-Cut Timber Noggins (45x95mm) for Stable Timber Decking

Save time and build a stronger deck with pre-cut noggins for 450mm joist centres. Pressure treated for longevity.

If you aren't sure how many noggins you need for your timber framework, please get in touch for advice.