Decking & Landscaping

Pre-Cut Noggins (45x95mm) for Stronger Composite Decking. Save time and effort with pre-cut noggins for 300mm joist centres. Pressure treated for durability.
- Machined from 47 x 100mm, finished size approx. 45 x 95mm
- Smooth regularised finish
- Good quality, slow grown softwood

If you aren't sure how many noggins you need for your timber framework, please get in touch for advice.

Add the finishing touches to composite decking with this Composite Prime HD Deck Dual End Cap - Antique

- Part of the Composite Prime HD Deck Dual Antique range
- This cap is designed to securely fit into exposed board ends of Composite Prime HD Deck Dual Antique deck board

Add the finishing touches to composite decking with this Composite Prime HD Deck Dual End Cap - Carbon

- Part of the Composite Prime HD Deck Dual Carbon range
- This cap is designed to securely fit into exposed board ends of Composite Prime HD Deck Dual Carbon deck board

Add the finishing touches to composite decking with this Composite Prime HD Deck Dual End Cap - Oak

- Part of the Composite Prime HD Deck Dual Oak range
- This cap is designed to securely fit into exposed board ends of Composite Prime HD Deck Dual Oak deck board

Add the finishing touches to composite decking with this Composite Prime HD Deck Dual End Cap - Walnut

- Part of the Composite Prime HD Deck Dual Walnut range
- This cap is designed to securely fit into exposed board ends of Composite Prime HD Deck Dual Walnut deck board

Add the finishing touches to composite decking with Composite Prime HD Deck® XS End Caps - Lava

- Part of the Composite Prime HD® XS Lava range
- This cap is designed to securely fit into exposed board ends of Composite Prime HD Deck® XS Lava decking

Pre-Cut Noggins (45x145mm) for Composite Decks

Save time and effort with pre-cut noggins for 300mm joist centres (composite decking standard). Pressure treated for durability.

If you aren't sure how many noggins you need for your timber framework, please get in touch for advice.

Pre-Cut Timber Noggins (45x95mm) for Stable Timber Decking

Save time and build a stronger deck with pre-cut noggins for 450mm joist centres. Pressure treated for longevity.

If you aren't sure how many noggins you need for your timber framework, please get in touch for advice.

A metal fixing plate designed for joining sleepers but could have many uses.

- 80mm x 170mm x 2.0mm
- 8 x 8mm diameter fixing holes
- Galvanised finish

A metal fixing plate designed for joining sleepers but could have many uses. This fixing plate is galvanised and powder coated olive green.

- 80mm x 170mm x 2.0mm
- 8 x 8mm diameter fixing holes
- Galvanised + powder coated; Olive Green (RAL 7002)
- Olive coloured fixings available

A large, heavy duty right angled fixing plate designed for joining sleepers but could have many uses.

- 81mm x 85mm x 2.0mm (each side)
- 8 x 8mm diameter fixing holes
- Galvanised finish

Pre-cut noggin to suit 450mm joist centres, a popular joist centre for timber decking. Building noggins into framework will significantly increase strength and rigidity. Pre-cut noggins make building framework quicker, easier and more accurate than cutting noggins on site. No need to re-treat cut ends as they are fully pressure treated.

- Machined from 47 x 150mm, finished size approx. 45 x 145mm
- Smooth regularised finish
- Good quality, slow grown softwood
- Pressure treated green

If you aren't sure how many noggins you need for your timber framework, please get in touch for advice.

A large, heavy duty right angled fixing plate designed for joining sleepers but could have many uses. This bracket is galvanised and powder coated olive green.

- 81mm x 85mm x 2.0mm (each side)
- 8 x 8mm diameter fixing holes
- Galvanised + powder coated; Olive Green (RAL 7002)
- Olive coloured fixings available

- 41mm x 41mm square spindles.
- Pressure treated for durability.
- Based on a gap of 99mm in between spindles, 7.14 spindles cover 1 metre.

Do you need timber cut to length? We'll do the hard work for you!

We can cross-cut all of our timber products to length, including our Oak & treated softwood sleepers.

All cross-cutting is to a tolerance of ±2mm. We are only able to offer 90° cuts.

Please note: due to the blade dimensions, approx. 4mm of timber is removed per cut, this is known as the blade kerf E.G. if you start with a 2400mm sleeper and cut off three 600mm lengths, the remaining off-cut will be approx. 588mm long. Please consider this when calculating your requirements.

We will only machine our own timber, if your order requires a lot of machining, please contact us to discuss your requirements.

We are unable to accept returns if products have been cut to order.

When timber has been cut to length we recommend applying end grain preservative to the cut areas. For larger orders that involve a lot of cutting, we recommend our pressure-treatment service. The treatment process takes about one week, price is based on the total volume of timber to be treated, the minimum charge is £80 +VAT (£96 inc. VAT). Contact us for more information.