Decking & Landscaping

A large, heavy duty right angled fixing plate designed for joining sleepers but could have many uses.

- 81mm x 85mm x 2.0mm (each side)
- 8 x 8mm diameter fixing holes
- Galvanised finish

Pre-cut noggin to suit 450mm joist centres, a popular joist centre for timber decking. Building noggins into framework will significantly increase strength and rigidity. Pre-cut noggins make building framework quicker, easier and more accurate than cutting noggins on site. No need to re-treat cut ends as they are fully pressure treated.

- Machined from 47 x 150mm, finished size approx. 45 x 145mm
- Smooth regularised finish
- Good quality, slow grown softwood
- Pressure treated green

If you aren't sure how many noggins you need for your timber framework, please get in touch for advice.

A large, heavy duty right angled fixing plate designed for joining sleepers but could have many uses. This bracket is galvanised and powder coated olive green.

- 81mm x 85mm x 2.0mm (each side)
- 8 x 8mm diameter fixing holes
- Galvanised + powder coated; Olive Green (RAL 7002)
- Olive coloured fixings available

- 41mm x 41mm square spindles.
- Pressure treated for durability.
- Based on a gap of 99mm in between spindles, 7.14 spindles cover 1 metre.

Do you need timber cut to length? We'll do the hard work for you!

We can cross-cut all of our timber products to length, including our Oak & treated softwood sleepers.

All cross-cutting is to a tolerance of ±2mm. We are only able to offer 90° cuts.

Please note: due to the blade dimensions, approx. 4mm of timber is removed per cut, this is known as the blade kerf E.G. if you start with a 2400mm sleeper and cut off three 600mm lengths, the remaining off-cut will be approx. 588mm long. Please consider this when calculating your requirements.

We will only machine our own timber, if your order requires a lot of machining, please contact us to discuss your requirements.

We are unable to accept returns if products have been cut to order.

When timber has been cut to length we recommend applying end grain preservative to the cut areas. For larger orders that involve a lot of cutting, we recommend our pressure-treatment service. The treatment process takes about one week, price is based on the total volume of timber to be treated, the minimum charge is £80 +VAT (£96 inc. VAT). Contact us for more information.