Builders Metalwork

Galvanised fixing band FB20A has many building & DIY uses.

- Flexible galvanised steel can be easily shaped by hand
- 1mm thick
- 20mm Wide
- 10m Coil
- Includes three hole options to suit a variety of fixings

A quality Post Base made by Simpson Strong-Tie. Used to raise timber posts and timber framework above ground level, which prevents rotting caused by moisture from ground contact. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

- Steel S235JR according to NF EN 10025
- Hot-dip galvanized according to NF EN ISO 1461
- Total Height - 100mm
- Tubular Core - 48mm diameter
- Top plate - 100 x 100mm x 4mm
- Base plate - 130 x 130mm x 4mm
- Maximum post cross section - 200 x 200mm
- 11.0mm fixing holes (x8)

A quality Post Base made by Simpson Strong-Tie. Used to raise timber posts and timber framework above ground level, which prevents rotting caused by moisture from ground contact. The height/level of the square support plate can easily be adjusted after installation which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

- Dichromate coated galvanised mild steel
- Height Adjustable: 100mm→150mm
- Threaded Core: 20mm diameter
- Top plate: 100 x 100mm x 5mm
- Base plate: 130 x 130mm x 5mm
- 12mm fixing holes

A post support fitting for installing timber posts and timber framework. The timber sits on the Post Support out of ground contact, which prevents rotting due to moisture from the ground. The height/level of the square support plate can easily be adjusted which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

Installation: drill a 22mm diameter hole in the end of the timber post for the threaded bar to fit into, the depth of hole will vary depending on how much elevation is required. The post should sit firmly over the threaded bar down to the square support plate. The two nuts are tightened against each other to lock the support plate in the required position. The bottom of the post support is designed to be bolted down to a concrete base, we recommend using M10 Thunder Bolts.

- Welded construction, galvanised steel
- Total Height - 255mm
- Threaded bar - 22mm diameter
- Square support plate - 80 x 80mm x 4.5mm
- Bolt Down Plate - 80 x 80mm x 4.5mm
- 11mm fixing holes (x8)

A post support fitting for installing timber posts and timber framework. The timber sits on the Post Support out of ground contact, which prevents rotting due to moisture from the ground. The height/level of the square support plate can easily be adjusted which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts.

Installation: drill a 22mm diameter hole in the end of the timber post for the threaded bar to fit into, the depth of hole will vary depending on how much elevation is required. The post should sit firmly over the threaded bar down to the square support plate. The two nuts are tightened against each other to lock the support plate in the required position. The bottom of the post support is designed to be bolted down to a concrete base, we recommend using M10 Thunder Bolts.

- Welded construction, galvanised steel
- Total Height - 255mm
- Threaded bar - 22mm diameter
- Square support plate - 100 x 100mm x 4.5mm
- Bolt Down Plate - 100 x 100mm x 4.5mm
- 11mm fixing holes (x8)