Builders Metalwork

30mm Fence Panel L-Clip, a useful panel clip for discreet fixing that can only be seen from one side. Can also be used to fix gravel boards, as well as many uses as a general purpose corner bracket.

- Angle: 30 x 30mm
- Height: 50mm
- Galvanised Steel

Simpson Strong-Tie NP15/80/140 nail plates can be used in various applications, in particular for jointing or the connection of wood elements in the same plane.

Thickness: 1.5mm
Width: 40mm
Length: 120mm
Fixing Holes: 5.0mm (x9)

Galvanised mini joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for hanging 47mm wide timber
- Width - 115mm (including fixing wings)
- Length - 62mm
- Depth - 48mm

Install using 3.75 x 30mm square twist nails:
16 nail holes / hanger
1 kg square twist nails installs 21 hangers

The RR ridge rafter connector provides alignment control and correct nailing locations. The RR47 may be used with any rafter slope up to 30°. Galvanised for corrosion resistance.

For back-to-back installations, the minimum width of the ridge plate is 38mm. Secure in place using 3.75 x 30mm square twisted nails.

Measurements (Ref. image 3):
A: 47mm
B: 83mm
C: 33mm
D: 114mm
t (Thickness): 1.2mm

Fixing Holes:
Header: 4mm (x4)
Joist: 4mm (x4)

Nationwide delivery is available on this product, call 0117 967 4382 for details or submit a contact form below.

Galvanised Truss Clip for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for securing 47mm wide timber
- Overall Width - 105mm (including fixing wings)
- Length - 100mm

Install using 3.75 x 30mm square twist nails
12 nail holes / truss clip
1kg square twist nails installs approx. 29 truss clips

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for 47mm wide timber
- Width: 146.4mm (including fixing wings)
- Length: 236.5mm
- Depth: 52.1mm

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for 47mm wide timber
- Width - 145mm (including fixing wings)
- Length - 480mm
- Depth - 65mm

Metal brace for strengthening corners. Can be used for internal or external corners.
Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole.
Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 1.5mm
Width: 16mm
Length: 50mm x 50mm
Fixing Holes: 5.0mm (x4)

The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of floor joists and the bottom chords of trusses without the need for notching.

Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.

A simple contempory handrail bracket, used for fixing handrails to walls and posts.

Wall fixing plate: 58mm diameter
Handrail fixing plate: 24 x 60mm
Bracket Length: 65mm (from wall to centre of handrail fixing plate)
Screw holes to suit 5.0mm countersunk screws
Electro-galvanised finish

Metal brace for strengthening corners. Can be used for internal or external corners.
Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole.
Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 1.8mm
Width: 20mm
Length: 75mm x 75mm
Drill Holes: 5.0mm (x6)

Metal corner plate for strengthening corners. Pre-drilled fixing holes for use with countersunk screws.
Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.0mm
Width: 16mm
Length: 75mm x 75mm
Fixing Holes: 5.5mm (x4)

A mild steel plate with fixing holes used for strengthening and repairs.
Pre-drilled for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 1.8mm
Width: 18mm
Length: 75mm
Fixing Holes: 5.0mm (x4)

Steel T-plate suitable for a range of timber frame building uses. Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.0mm
Overall Width: 75mm x 16mm
Overall Length: 75mm x 16mm
Fixing Holes: 5.0mm (x5)

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads.

- Suitable for 75mm wide timber
- Width - 169mm (including fixing wings)
- Height - 247mm
- Depth - 55mm