Search
Mon-Fri: 7am to 5pm | Sat: 8am to 12pm | Sun: Closed
Show Prices Inc. VAT
Product Catalogue
Menu Close

100 x 200mm x 2.4m Oak Sleeper

New, untreated European Oak sleeper. A naturally durable sleeper without chemical preservative. Mainly used for landscaping projects; including raised beds and retaining walls but could have many other uses.

There are around 600 different Oak species, they aren’t all naturally durable. We only source Quercus Robur and Quercus Petraea which both have naturally durable heartwood.

These sleepers have a sawn finish, they are suitable for non-structural projects (not to be used as beams or lintels).

To understand the characteristics of Oak sleepers, please read our product specification guide in the downloads tab below.
Availability: 203 in stock
£45.00 Inc. VAT
i h

New, untreated European Oak sleeper. A naturally durable sleeper without chemical preservative. Mainly used for landscaping projects; including raised beds and retaining walls but could have many other uses.


There are around 600 different Oak species, they aren’t all naturally durable. We only source Quercus Robur and Quercus Petraea which both have naturally durable heartwood.


These sleepers have a sawn finish, they are suitable for non-structural projects (not to be used as beams or lintels).


To understand the characteristics of Oak sleepers, please read our product specification guide in the downloads tab below.

Product tags
Customers that ordered this item also bought:
Picture of 100mm Corner Brace

100mm Corner Brace

Metal brace for strengthening corners. Can be used for internal or external corners.
Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole.
Bright Zinc Plated (BZP) for corrosion resistance.

Thickness: 2.0mm
Width: 24mm
Length: 100mm x 100mm
Drill Holes: 6.0mm (x6)
Stock Availability: 72 in stock
From £0.61 Inc. VAT
Picture of 1.8m Feather Edge Board

1.8m Feather Edge Board

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence.
Feather-edge can also be fitted horizontally as a budget cladding.

- 125mm Board Width
- 10 boards needed per linear metre (25mm overlap)
- Cut from 22 x 125mm
- Finished size approx. 12mm on thick edge tapering to 6mm on thin edge
- Homegrown Spruce
- Sawn finish
- Pressure treated green
Stock Availability: 13158 in stock
From £1.58 Inc. VAT
Picture of 75 x 75mm x 1.8m Incised UC4 Treated Post

75 x 75mm x 1.8m Incised UC4 Treated Post

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses.

- Dimensions: 75 x 75mm x 1.8m
- Homegrown Softwood, locally produced in the UK
- Sawn & incised finish
- Fully incised surface for improved treatment penetration
- UC4 Pressure Treatment - Green
Stock Availability: 341 in stock
£6.70 Inc. VAT
Picture of 25 x 50mm x 3.6m Treated Batten

25 x 50mm x 3.6m Treated Batten

Timber batten is a general purpose building material that has many uses for trade and DIY.

- Fine-sawn finish
- Pressure treated green
- This batten does not comply with BS5534, we stock blue batten which does meet this grade.
Stock Availability: 2033 in stock
£3.55 Inc. VAT
Picture of M10 x 100mm Thunder Bolt

M10 x 100mm Thunder Bolt

A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing.

Drill Bit Dia. - 10mm
Anchor Length - 100mm
Washer Size - 12mm (M12)
Min Hole Depth - 70mm
Min Over Drill Depth - 20mm
Min. Embed Depth - 50mm
Max. Fixture Thickness - 50mm
Drill Bit Dia. for clearance - 12mm (to prevent binding when tightening bolt)
Head Type - Hex Head, 17mm (Across Flats)
Driver Type - Impact driver, socket, spanner
Max Tightening Torque - 60Nm
Stock Availability: 165 in stock
From £1.32 Inc. VAT
Picture of M10 Form C Washer

M10 Form C Washer

A heavy steel washer, for general use with bolts and threaded bar (studding).
BZP (Bright Zinc Plate) finish.

Dimensions: 2mm x 24mm Diameter
11mm Bolt Hole: To suit M10 thread
Stock Availability: 433 in stock
From £0.12 Inc. VAT